What about the transmission cooler lines that ran to the m20 radiator? The radiator I found has a tranny cooler on the front but the connections are different that's the m20 ones what do I need to do!?
Announcement
Collapse
No announcement yet.
M42 radiator swap complete!
Collapse
X
-
...1987 325is, S50B30US, Kamei side skirts, Zender Spoiler.
MT2 Wheel, 95 M3 Rack, Condor Speed Shop knob, UUC SSK w/ DSSR, Billy Sports/GE Coilovers, KAMotors CAI.
Originally posted by MclubSportWhy you have a badge on wheel ? You do not know what car you have? But if you have a mustache, you know better where is your mouth?
Horrible with responding to PMs, I'm so sorry.
Comment
-
Well, got it mostly sorted out today but 2 quick questions.
This is going in 87 e to I swap, I got all of recomended parts minus the electric fan and temp switch.
I was trying to figure out how to install the buffer cup PN 17111712347 but just can't seem to figure it out. The car has 4 mounting point welded to the radiator support, 2 of which are being used. I can't see where that buffer cup would go but the radiator seems to sit very well on the 2 existing mounts. Do I just use those?
Also, the top has bout 1/4" of play, is that normal? I don't want it to hit the fan or the drain plug to hit the PS pump because it's VERY close.
Thanks
Comment
-
Generally its loose in factory mounts. Push the drivers side one up from underneath and itl pop out of its slot and you can put the new one in its place.
Originally posted by Supratreo View PostWell, got it mostly sorted out today but 2 quick questions.
This is going in 87 e to I swap, I got all of recomended parts minus the electric fan and temp switch.
I was trying to figure out how to install the buffer cup PN 17111712347 but just can't seem to figure it out. The car has 4 mounting point welded to the radiator support, 2 of which are being used. I can't see where that buffer cup would go but the radiator seems to sit very well on the 2 existing mounts. Do I just use those?
Also, the top has bout 1/4" of play, is that normal? I don't want it to hit the fan or the drain plug to hit the PS pump because it's VERY close.
Thanks
Comment
-
super helpful, thanks guysLast edited by spiDmang; 06-15-2017, 11:47 AM.-Brad, AlphaTeam Motorwerks, LLC
91' 318iS - S54/6MT Swapped
08' E90 M3 6MT - Daily
04' Chevy Duramax CCLB - Work Truck/Hauler
Originally posted by IronJoe
Alpha Team: running through e30s, gringo icebergs, and 19 yr olds.
Originally posted by 2mAn
Brads a standup guy even though he likes buttsex
Comment
Comment