Announcement

Collapse
No announcement yet.

m20 itb's?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    ITB's allow the engine to run better when using a bigger cam.

    I wonder if those extrude a body ones are 45mm at the bellmouth or if its the bore of the throttles. Looks like they offer extension pieces to make the runner length tunable......mmm

    Would be a good project to make your own GRP/CFRP plenum to allow the use of a single filter and allow CAI

    As for extrude honing who says that the runners are not already oversized and there for making them bigger will be counter productive?
    89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

    new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

    Comment


      #17
      Originally posted by digger View Post
      ITB's allow the engine to run better when using a bigger cam.

      I wonder if those extrude a body ones are 45mm at the bellmouth or if its the bore of the throttles. Looks like they offer extension pieces to make the runner length tunable......mmm

      Would be a good project to make your own GRP/CFRP plenum to allow the use of a single filter and allow CAI

      As for extrude honing who says that the runners are not already oversized and there for making them bigger will be counter productive?
      well I don't know about you, but I'm pulling 5-10kpa of vacuum with the stock manifold/TB at WOT. the filter is only about 2-3kpa - I'd think an opened up manifold and TB would help me for sure (in fact I have one to put on, someday!).
      Build thread

      Bimmerlabs

      Comment

      Working...
      X