175whp

[Fernflex]

New dyno four months later, the first one was 165whp and 168 of tq.
I haven't change anything just new oil, oil filter and the engine has many more miles. The first dyno the car didn't have more than 200 miles.

The car still running lean after 5,500 rpm exctly when the car opens vtec and start to produce horses

Still oem afm, ecu with a 2.5L chip, 17.5 injectors, 288 cam, bigger valve, bigger throttle body, header, exhaust, msd 6al, msd ignition coil, light weight flywheel.

Im waiting for the megasquirt ecu kit from blueapplesoda.

Run conditions 89 degrees temp, 40% humidity.

[Wanganstyle]

do you have the AFR chart?

[HR2L]

do you have the AFR chart?

In for AFR chart.

[LJ851]

do you have the AFR chart?

In for AFR chart.

Uummm, it's right on the screen at the bottom. It's the one that says "Air/Fuel"

[Fernflex]

Uummm, it's right on the screen at the bottom. It's the one that says "Air/Fuel"

;)

I have to scan the dyno sheet for better resolution this pic was taken with my iphone.

Dyno 4 month ago

[MonkeyMan]

nice numbers - there should be another 10-12 horses in there after a tune and maybe swapping out the stock afm...

where did you get the big bore t-body?

[Fernflex]

Im waiting for the megasquirt to remover the afm and install a set of itbs.

My bbtb I got it from a friend who bought it form Gruten parts you can also buy it here. http://www.westcoastriots.com/htmlfiles/Products.html

[Myster-E]

Nice numbers. Is it a 2.5 or 2.7?

[Luis325]

Cant wait to see this thing tuned and with the ITB's!!!!
I told you to be patient and youll fall in love with the E30!!! Haha

Guys this thing is FAST ! First through 4rth gear stayed right next to a e30 turbo with 250 whp! And left in The dust a E36 M with a few mods!!!!
Fern you need some videos for the guys to see this sexy E30!!!

[Luis325]

Its a 2.7 !

[Sagaris]

Nice numbers for motronic!
I anticipate seeing updates with tuning added.
So you are running a 288 cam with stock pistons? I figured there would be issues with that.

[Myster-E]

Its a 2.7 !

I love 2.7s especially Super etas.

[ForcedFirebird]

What pistons/compression?

[Luis325]

Engine is a stroker with Eta crank and rods with i pistons with notched valve reliefs and cut piston skirts. Decked block.
I head ported and polished with Schrick 288 cam with 1mm oversized eccentrics from IE.
Big bore TB. 17.5 injectors. Running on stock motronic 1.3.
Long tube Headers and crappy exhaust... ( lol fern has a double 2.25 from the headers to 2 18" bullet resonators an then a 22" dual in/out magnaflo...)
Trying to get him to change to a single 2.5 with just a borla or vibrant muffler! (do it)!


Im surprised hes making good power with all the mods untuned and having the car lean out after 5,000 rpm. Redline is stock 6,900 .
When MS is tuned and ITB's are on common 7,500rpm sexy time!
Compression is gustimated a 10.1

[Fernflex]

Compression is a little higher I think 10.5 or 10.9.

I also need an adjustable fuel pressure regulator, what are the best options?