Hello, my son has a 173 DME for his 2.7i motor that he is putting together. Can somebody point me to a diagram so I can check all the pins and confirm that it will mate to the wire harness he’s got?
Announcement
Collapse
No announcement yet.
Help me pin out a 173 DME?
Collapse
X
-
sigpic
1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]
-
More info to help
Where and how to access ECU: I have tried to illustrate where and how to access the ECU, it is in the glove box compartment. To access it open your glove box and undo the two screws holding the plastic cover that is at the "ceiling" of the glove box compartment, under there you will
Comment
-
I did a 173 motronic upgrade in an 87 eta using an 87 harness and did not have to change anything on the harness. Externals like injectors, reference, crank and oil level sensors had to be changed but zero on the harnessSeat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com
https://www.r3vlimited.com/board/sho...86#post4944786
Alice the Time Capsule
http://www.r3vlimited.com/board/showthread.php?t=360504
87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220
Comment
-
Originally posted by jeffnhiscars View PostI did a 173 motronic upgrade in an 87 eta using an 87 harness and did not have to change anything on the harness. Externals like injectors, reference, crank and oil level sensors had to be changed but zero on the harnessMy son has the 1987 325e, 2 door, 5speed
I daily the 1989 325i, 4 door, 5speed
Comment
-
Originally posted by jeffnhiscars View PostI did a 173 motronic upgrade in an 87 eta using an 87 harness and did not have to change anything on the harness. Externals like injectors, reference, crank and oil level sensors had to be changed but zero on the harness
Comment
-
Originally posted by nando View PostOh, I think I misread. He swapped an 87 325i harness into an ETA. I thought he was saying he plugged in a 173 DME into the eta harness. Yes, that makes sense. :)Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com
https://www.r3vlimited.com/board/sho...86#post4944786
Alice the Time Capsule
http://www.r3vlimited.com/board/showthread.php?t=360504
87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220
Comment
Comment