MMP M62B44 Build Project "Jack-N-Coke"

[MonkeyMadness]

Swidish Euro Lip and E90 Drop Hats Instslled

[MonkeyMadness]

[ATTACH]87690[/ATTACH]
[ATTACH]87691[/ATTACH]
[ATTACH]87692[/ATTACH]

[MonkeyMadness]

So washed the wip, found out there is actually a nice looking car under all that durt and dust...

I'm all done just need a few more things
4x knock sensors, 2x o2 sensors and an exhaust system. Oh and an MS3

[MonkeyMadness]

OK Finally got this working.....

[Old city bimmer]

Should have stuck with supercharged GM v6's.

Just IMHO :P

:rofl:

[econti]

The first link works, the second does not.

Things like this are bad. Bad because they make me want to put a M60 in an E30 someday.

[MonkeyMadness]

Should have stuck with supercharged GM v6's.

Just IMHO :P

:finger:

[ForcedFirebird]

Should have stuck with supercharged GM v6's.

Just IMHO :P

[MonkeyMadness]

Drove it today!

Ho-Lee-SHeeTa!

If only i could get this fucking vid to load up off my phone too anything else other than FB... Sorry for the odd link...

Make Sure to hit the HD on the vid! ENJOY I know I did!

https://www.facebook.com/photo.php?v=638705376237656&l=450713995091429692

[Old city bimmer]

Sounds great.

[Denny]

I can't deal with how good that sounds at idle

neither can I... and I am so far from finishing my own swap :(

[econti]

I can't deal with how good that sounds at idle

[MonkeyMadness]

OK so the Tach WORKS! WOOFUCKINGHOO!

Thank you Garagistic! You just made me a happy boy!

[MonkeyMadness]

So I got the some of the final bits needed to finish my build.
Received the new Garagistic tach speed splitter (Thank You!)


Bump and Shout out to them for the Help!

http://garagistic.com/index.php

Please visit them for your latest v8 swap needs...


I was also able to pick up the needed little gromits to finish my throttle cable..



If all goes well. I plan on backing it out of my garage down the street and back then parking it in the garage, cause I'm sure by that time the COPS will be looking for me due to the lack of exhaust.... ;D

[MonkeyMadness]

I've read this thread twice start to finish now.

Once before and now after acquiring a 97 540i 6 with smashed left doors. How much $ would you estimate in extra parts to swap it into my 90 e30? I guess a high ballpark figure is what I'm looking for. If you have a second I'd appreciate your opinion. I know you fabricated a lot of stuff but any estimate would help.

Thanks for the sweet pictures can't wait for burnout videos.

Dude I haven't a clue on what I have spent.
I like to think my build has been nickle and dimed. But at a glance back I think I spent much more than I would like to admit. Thankfully Frank seems to have addressed this in his v8 swap guide book. He has it as high as $7,100. To low as $4,300. +/-
But you have a donor so subtract $1600 for the m6x + 6spd trans and that would be your ball park build cost.