MMP M62B44 Build Project "Jack-N-Coke"

[MonkeyMadness]

So you ended up not using it or rewiring it?

Well I'm at a loss now.
I had it wired in behind the cluster, if you look back further in the build I documented the fitment in this build. well first thing i noticed was my tach not moving, so thinking "maybe I made a mistake" I would check the one think I messed with... So after checking both the harness adapter and the tach thingy and not finding anything wrong I pulled it off just to see if the tach would work at all.. and it did...
So I put the dash back together with out the tach thingy cause I know that all works. So my thought was I'll just wire the tack thingy into my harness adapter. But still nothing so I tried testing the thingy and I couldn't get anything to work....Crap....

So I sent a message to Garagistic explaining my problem and issue. Hopefully I'll hear back from them soon.

So, finally had time and the needed info to get back to project Jack-N-Coke

So today i installed the Garagetastic tach mod for the V8 swap.
Decided to mount this on the "blue c1" plug off the back of the cluster. Keeping in the cab, away from harm.
So if your interested in doing the same I'll post up the info below.

Blue C1 connecter
Soild brown = Negative/Ground
Grn/yellow = 12v/Positive
Pin #7 solid black splice this in dme to tach
Yellow to tach , white to dme.

Remember Garagetastic's mod requires a 4cyl tach plug. This mod will not work with the 6cyl plug
You'll need a Dakota Elc. Setup for the 6cyl.

[ATTACH]77077[/ATTACH]
[ATTACH]77078[/ATTACH]
[ATTACH]77079[/ATTACH]
[ATTACH]77080[/ATTACH]
After shrink rapping it and zip tie-ing it it the wire harness it is now protected and hidden
:beer:

[LoneWolf]

Ok so got the tach working.. Looks like my garagtastic tack sender thingy was in the way????
So i pulled it off and the damn thing woke right up...

So I try placing the garagtastci tach thingy in my adapter harness thingy. I'm pretty sure it was just my placement my inability to wire shit right....lol

So you ended up not using it or rewiring it?

[MonkeyMadness]

Ok so got the tach working.. Looks like my garagtastic tack sender thingy was in the way????
So i pulled it off and the damn thing woke right up...

So I try placing the garagtastci tach thingy in my adapter harness thingy. I'm pretty sure it was just my placement my inability to wire shit right....lol

[Denny]

Run test #2

Sounds really good cant wait to see this car in action.

[MonkeyMadness]

Yes. Clean everything up. Work some bugs out. Figure out my tach. I'm not getting a signal to my cluster so will be working on that next. Need a new belt. Coolent, ect.

[econti]

That looks sexual with the red rocker covers.
What's the next step? Tidy it up then tune?

[MonkeyMadness]

Run test #2

[Denny]

[econti]

Fuck yes! Now get a tune and do some skids!

[MonkeyMadness]

look at the shit eating grin!!

So we get to play soon?!?!?

yes! :D

[whodwho]

Look at the shit eating grin!!

so we get to play soon?!?!?

[MonkeyMadness]

ahh, teaser... the video is private!!

Try it now...lol

[whodwho]

ahh, teaser... the video is private!!

[MonkeyMadness]

So... I have been screwing around with the harness and crap and I think i got it figured out... finally

[MonkeyMadness]

Swap harness adapter. ...!



Here's the chart I used for mine adapter.
all the wires seemed to match up well.
Note: i have a91 318is c101 to 94 e34 x20 from a M5xtu.



I also used this webpage a point of reference..

http://www.megasquirt.325ix.com/MS_to_Motronic/C101_to_X20.html