M60b44 #

[The Dark Side of Will]

Congrats!

[driftingminor913]

ALIVE bitches!

Well it runs!!:D will upload vidz when I can. But it's a good feeling now that half the battle is now down.

[The Dark Side of Will]

That and just a hard-on for V8's in stuff there not supposed to be in

I sympathize.

I learned to drive in a '75 Datsun with 4.3 V8 from a '95 Caprice with Saginaw 4 speed + Borg Warner overdrive that my dad built.

I have an '87 Pontiac Fiero with a built Caddy Northstar engine... 4.6 liters and 312 HP at the wheels right now... setting up for cam upgrades, ported heads, upgraded manifold and more.

I'm also building an E30 S62 AWD, but still collecting parts.

[36brua]

It's a Nissan 240sx (s13) coupe, that has a motor out of a infinit Q45. Which is equivalent to our M60 swaps but instead it's a 4.5 quad cammed v8 in the Nissan world that makes 300+ hp

Thanks for the translation ... I barely know BMW codes I'm getting better in M60 speak:)

[driftingminor913]

What does that mean? it's a chevy ?? please interpret:???:

It's a Nissan 240sx (s13) coupe, that has a motor out of a infinit Q45. Which is equivalent to our M60 swaps but instead it's a 4.5 quad cammed v8 in the Nissan world that makes 300+ hp

[36brua]

Its a Vh45De swapped S13.

What does that mean? it's a chevy ?? please interpret:???:

[driftingminor913]

Sweeet... that was my guess, but I wasn't familiar enough with car or engine to be sure.

Yours?

You like DIY V8 2 seaters, eh?

That and just a hard-on for V8's in stuff there not supposed to be in

[The Dark Side of Will]

Sweeet... that was my guess, but I wasn't familiar enough with car or engine to be sure.

Yours?

You like DIY V8 2 seaters, eh?

[driftingminor913]

What car/engine is in the background?

Its a Vh45De swapped S13.

[The Dark Side of Will]

What car/engine is in the background?

[driftingminor913]

Ah gotcha. I think I remember seeing a build where they ran into the same problem. They fixed it by returning the 5/8" for the 3/4" on the clutch.

Sweet build BTW

Thanks man

[LoneWolf]

Sorry I went back and looked at the email for what I ordered and I ordered 3x 5/8" cylinders. And the two for the brakes worked just fine. But I will go up for the clutch.

Ah gotcha. I think I remember seeing a build where they ran into the same problem. They fixed it by returning the 5/8" for the 3/4" on the clutch.

Sweet build BTW

[driftingminor913]

You went 3/8"? I thought most guys are going 3/4"?

Sorry I went back and looked at the email for what I ordered and I ordered 3x 5/8" cylinders. And the two for the brakes worked just fine. But I will go up for the clutch.

[LoneWolf]

So I bled the brakes, and I should have listen to all of the notice's that said don't use the 3/8 master cylinder for the clutch. Cause I went ahead an bled it and yeah....no go. So that's the hold up at the moment but everything is a go

You went 3/8"? I thought most guys are going 3/4"?

[driftingminor913]

So I bled the brakes, and I should have listen to all of the notice's that said don't use the 3/8 master cylinder for the clutch. Cause I went ahead an bled it and yeah....no go. So that's the hold up at the moment but everything is a go