early model walbro pump conversion

[Wardie]

So I could get away with ripping out the pump and connecting the "fuel from tank" line to "fuel from engine" line? Just getting a 8mm->12mm barbed reducer?

[TobyB]

Probably. Unless the 12mm line exploded because it's old and not made for 43 psi...

then it would explode in a fireball that would consume at least half a town.

Or not.

t

[dougie30]

well this looks to be alot more difficult than expected. I will probably buy two new bosh pumps, i figured a bunch of people have successfully executed this.

Sent from my SPH-L710 using Tapatalk

[brahbarian]

well this looks to be alot more difficult than expected. I will probably buy two new bosh pumps, i figured a bunch of people have successfully executed this.

Sent from my SPH-L710 using Tapatalk

Ahahahaha. My thoughts exactly

Sent from my SM-G900P using Tapatalk

[TobyB]

Completely successfully. Car runs great.

"all" I had to do was to drop the tank and re- plumb it...

...and get a return line rigged!

t

[kistler#7]

Completely successfully. Car runs great.

"all" I had to do was to drop the tank and re- plumb it...

...and get a return line rigged!

t

bumping this as it doesnt seem to be answered, care to elaborate on the process and parts needed?