FITMENT ?: 16x8 ET20/16x9 ET24

[89DelphinE30]

Can anyone confirm if this offset would fit a 325is E30? I'm looking into purchasing a set of BBS RS wheels tomorrow. I'm not a wheel guy so any help would be great thanks!

Thanks

16x8 ET20/16x9 ET24

[MPLFoster]

http://www.r3vlimited.com/board/showthread.php?t=83125&page=556

ask Jay. Our resident wheel/tire fitment guru. :up:

pretty sure you're gonna need spacers. not sure if the rears will work though. i have a set of 16x8.5 +24 and i have to use 10mm spacers and run slightly undersized tires to fit. Jay says that's max without bodywork.

[89DelphinE30]

http://www.r3vlimited.com/board/show...83125&page=556

ask Jay. Our resident wheel/tire fitment guru. :up:

pretty sure you're gonna need spacers. not sure if the rears will work though. i have a set of 16x8.5 +24 and i have to use 10mm spacers and run slightly undersized tires to fit. Jay says that's max without bodywork.

Thanks you're the man!

[mitchlikesbikes]

i have 16x8 +20 on the front with treehouse eyeballs and 225/50/16 potenza re11s. my fenders are rolled and pulled but there's basically no rubbing on vogtland springs

[varg]

I'm running 16x8 ET20 with 225/45/16 star specs. Stock height. No rub in the front, but plenty in the back. I rolled the fenders and it fixed that.