ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Mystikal]

what will I need for tires/spacers? I want a little stretch. car is sitting on HR race with Billy sports.

You'll need a noticeable stretch to fit those. Think 205/45/16s all around with an aggressive fender roll.

[Mystikal]

will et35 wheels on a 17 x 7.5 not look right without spacers ?

They will be slightly sunken in, yeah. If you use 15mm spacers all around they will look a lot better.

[Mystikal]

17x8.5 ET13 wheels with 215/40/17 front and rear. My suspension is GC coil-overs with Koni shocks. Will they fit a late model E30?

That's a tough one. The rear will require heavy rolling, but if you flatten it out you should just be okay.

[kronus]

15x7 ET13 wheels with 205/50R15 tires on IE3 with early model arches? (They're E21 fitment)

Will the rears rub? Will the front lips be flush with the fender?

[91 318is]

17x8.5 ET13 wheels with 215/40/17 front and rear. My suspension is GC coil-overs with Koni shocks. Will they fit a late model E30?

That's a tough one. The rear will require heavy rolling, but if you flatten it out you should just be okay.

I have mine rolled now for 16x9 ET15's with 215/40/16's now. I'm more worried about the front, will the fronts fit flush or will it poke out some?

Responded to your PM also, basically the same question.

Thanks

[ThreeTwentyFissel]

wtv

[sticksdaman]

205/50/15 on a 15x8 et 30 wheel + a 10mm spacer, am I ok? The car will be slammed sufficiently.

[TexasE30]

want to confirm this with experts.

16x9 et 20 all around. I will need 8mm spacer up front and 5mm spacer up in back.

I have 16x9 et 15 all around now. I have 3mm spacer up front. Its pretty flushed in rear. Front may need little fender rolling to get to flush but it doesnt rub.

So 8mm up front and 5 in back sound right?

[Mystikal]

15x7 ET13 wheels with 205/50R15 tires on IE3 with early model arches? (They're E21 fitment)

Will the rears rub? Will the front lips be flush with the fender?

It shouldn't rub, but make sure they clear the calipers. Lots of those E21 wheels have very little inner clearance.

The front won't be quite flush, but will still be aggressive.

[Mystikal]

I have mine rolled now for 16x9 ET15's with 215/40/16's now. I'm more worried about the front, will the fronts fit flush or will it poke out some?

Responded to your PM also, basically the same question.

Thanks

They will be just barely past flush. They'll fit very nicely, IMO.

[Mystikal]

205/50/15 on a 15x8 et 30 wheel + a 10mm spacer, am I ok? The car will be slammed sufficiently.

Yup that's fine. Anything bigger than a 205 will need fender rolling.

[Mystikal]

want to confirm this with experts.

16x9 et 20 all around. I will need 8mm spacer up front and 5mm spacer up in back.

I have 16x9 et 15 all around now. I have 3mm spacer up front. Its pretty flushed in rear. Front may need little fender rolling to get to flush but it doesnt rub.

So 8mm up front and 5 in back sound right?

Your math is correct.

[e30slut]

You'd need spacers, and staggered diameters are fine as long as you get the tire sizes right.

I'd recommend 20mm spacers on the front, 15mm spacers on the back, 215/40/17 tires front, 215/35/18 tires rear.

By no means a cheap setup, but it'd look pretty damn good.

wont be cheap at all.. thanks a bunch man, you really are the shit..

[Naplm00]

how do i make these fit?

Ive got a Vert on bavauto springs and billie sports

either set?

[stinkydriverx]

nvm jay.
Answered my own question by using the SEARCH function =]