ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Mystikal
    Moderator
    Wheel Fitment Expert
    • Nov 2003
    • 9602

    #5176
    Originally posted by GunMetalGrey
    So if I went with a 8.25 would that take car of the issues? (same offset ect) then what tire would I want
    Yes. 235/40/17.

    Comment

    • Mystikal
      Moderator
      Wheel Fitment Expert
      • Nov 2003
      • 9602

      #5177
      Originally posted by MC Hammered
      I'm trying to make my 16" wheels work, so would a 245/35/16 on a 16x8.5 ET25 wheel fit in the rear?
      Yes.

      Comment

      • Mystikal
        Moderator
        Wheel Fitment Expert
        • Nov 2003
        • 9602

        #5178
        Originally posted by dmoney(AB)
        alright
        My wheels are 17x8.5 et13, I need an 8mm spacer with these wheels to clear my callipers.
        What does this calculate into for the perfect offset? or am i reading completely wrong into this?

        just trying to find a nice set of wheels that will work with the bbk.
        Offset /= Brake clearance

        You'll need a template (usually a .pdf) from the brake manufacturer to know for sure what fits.

        Comment

        • Mystikal
          Moderator
          Wheel Fitment Expert
          • Nov 2003
          • 9602

          #5179
          Originally posted by cbouchez
          I can pull 215's at all corners without rubbing? H&R Rare cup kit?



          BTW: Thanks for the info!

          You are the man.
          Yes, all around without rubbing. If the tire is oddly wide you might need the slightest of rear fender rolls.

          Comment

          • Mystikal
            Moderator
            Wheel Fitment Expert
            • Nov 2003
            • 9602

            #5180
            Originally posted by noE30
            17" style 5s or style 19's, both 17x8 et 20. How doable would those be on a 89 coupe if you ran 18mm adapters? I haven't had any luck finding any one running something similar.
            Might have to look for a place that can re drill.
            It's possible with a 195/45 or 205/40 and a flat fender roll all around. May need additional front camber (plates, crash mounts) if you're very low.

            Comment

            • Mystikal
              Moderator
              Wheel Fitment Expert
              • Nov 2003
              • 9602

              #5181
              Originally posted by e30newbie1212
              will 15x8 with 4 inch backspacing and a 205/50 tire fit in the front of my early model? the back will be 15x8 with et0 so im not worried about those. Just the fronts
              Not going to fit.

              Comment

              • Mystikal
                Moderator
                Wheel Fitment Expert
                • Nov 2003
                • 9602

                #5182
                Originally posted by Vivek
                So a slightly oversized tire (215/50) is not recommended? Why not? i always liked the look of tires a slightly larger diameter and it should be okay gearing-wise because the car already has a 4.27.
                Because it doesn't fit without contacting things.

                Comment

                • Mystikal
                  Moderator
                  Wheel Fitment Expert
                  • Nov 2003
                  • 9602

                  #5183
                  Originally posted by mikeb23ft
                  This question is noob as hell.

                  I found some E34 Style 29s for 100 bucks, I'm going to pick them up. They're obviously 5x120. I've searched around and don't see anybody running these on an E30 with adapters. Why is this?
                  Need the offset and width.

                  Comment

                  • Mystikal
                    Moderator
                    Wheel Fitment Expert
                    • Nov 2003
                    • 9602

                    #5184
                    Originally posted by Jozi
                    At a guess I would say they would get pushed way out of the arches when using adapter as they normally are quite thick (20-25mm?).

                    Anyone run 16x9 et15 with 225/45/16's? Looking at a tyre size calc these are close to stock 205/55/15's. I can do what ever work is required before respray
                    Without fender pulling/flaring, it's not possible. If you plan to do it you'll have to mount them to see how much space you need to create before starting to roll/pull/section. It's not going to work with the stock arch line.

                    Comment

                    • Mystikal
                      Moderator
                      Wheel Fitment Expert
                      • Nov 2003
                      • 9602

                      #5185
                      Originally posted by jrgafer
                      hey guys, first post, im from guatemala central america, i want to buy some 16 esm 1 wheels 8 wider like DTM looks what offset i should use??? 20 or 35. Tire?? 205 i want 215 all around whith eichback spring
                      I'm assuming this is for a non-iX non-M3 non-5lug E30.

                      16x8 +20
                      205/50 or
                      215/45 or
                      225/45

                      Comment

                      • Mystikal
                        Moderator
                        Wheel Fitment Expert
                        • Nov 2003
                        • 9602

                        #5186
                        Originally posted by Ian Bowers
                        245/40-17 or 235/40-17 on a 17x8.25 with ET20.

                        E30 M3 Front/rear fiberglass quarters. Possible? I can "space" the rear fender out if I need to. I know I'm running into the issue of the tires being oversized (diameter), but it's a track/drift car. What size spacer would you recommend, if any?
                        You only need a fender roll to fit 235s all around. A small pull for 245s (and added front camber, which I assume you have if you're drifting).

                        Comment

                        • e30newbie1212
                          Advanced Member
                          • May 2011
                          • 110

                          #5187
                          Originally posted by Mystikal
                          Not going to fit.
                          et 0 in teh front -12 out back?
                          GetRealWeird.com
                          For all your daily entertainment needs

                          Comment

                          • e30shmobberr
                            E30 Mastermind
                            • Mar 2010
                            • 1934

                            #5188
                            I am looking into rubber for a set of wheels I have. I do not know what is a proper tire size that is good with the s50, any ideas? Wheels are 16x7 et37 and I'll be running 10mm spacer front and rear. Also I don't know how far the wheels will sit, anyone have a close setup that I can see photos of? Thanks in advance, my wheel/tire knowledge isn't great

                            Patrick - IG:niicknac
                            RIP 1987 BMW 325is - S50'd ZF 6-speed, flared, bagged

                            Comment

                            • Mystikal
                              Moderator
                              Wheel Fitment Expert
                              • Nov 2003
                              • 9602

                              #5189
                              Originally posted by e30newbie1212
                              et 0 in teh front -12 out back?
                              Nope.

                              Comment

                              • Mystikal
                                Moderator
                                Wheel Fitment Expert
                                • Nov 2003
                                • 9602

                                #5190
                                Originally posted by e30shmobberr
                                I am looking into rubber for a set of wheels I have. I do not know what is a proper tire size that is good with the s50, any ideas? Wheels are 16x7 et37 and I'll be running 10mm spacer front and rear. Also I don't know how far the wheels will sit, anyone have a close setup that I can see photos of? Thanks in advance, my wheel/tire knowledge isn't great
                                You can fit up to a 225/45/16 with that setup. There are no great tires in that size any longer though, so look at 215/45 and 205/50.

                                Comment

                                Working...