ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Comment
-
205/45. Just a roll.Comment
-
16x9
Et25
DTM flares, which adds two inches out on the flares.
Coilovers
I want the tires to be filling out the flares, but not have to worry about rub, I can run spacers no problem.
Same size tires all around.
From what it sounds 245/45 with 15mm spacers all around?
Could I get away with a 245/50? In order to get road tires lolComment
-
17x8 et 32
17x8.5 et 32
215/40
What spacers would you use
Possible to fit a wider tire?
mtech1/2jzgte/r154/275tire
function>formComment
-
You would need an effective +6 final offset to clear, so a 26mm adapter in theory. And at that point, you'll be waaaayyyy outside of the bodywork. I wouldn't recommend it.Comment
-
10mm front spacer, none in the rear. 235/40 all around. The rear will be very close to the trailing arm seam and may need either a tiny spacer or a slight grinding of said seam.Comment
-
mystikal, here to badger you again
I decided to go ahead and add flares (IE or dtmfiber) to my project car so I can fit some better sized rubber on my wheels, which are the typical brock b1 17s, 8.5et13 fronts and 10et20 rears. What can I fit now? Don't mind spacers if need be. I was going to go with newmans set up of having 245/45 and 275/40 as he had IE flares also. Any other thoughts?
TIA2008 335i - n54b30
1991 318i - m52b28
1994 fzj80 - LAND CRUSHERComment
-
mystikal, here to badger you again
I decided to go ahead and add flares (IE or dtmfiber) to my project car so I can fit some better sized rubber on my wheels, which are the typical brock b1 17s, 8.5et13 fronts and 10et20 rears. What can I fit now? Don't mind spacers if need be. I was going to go with newmans set up of having 245/45 and 275/40 as he had IE flares also. Any other thoughts?
TIAComment
Comment