Announcement

Collapse
No announcement yet.

ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by ruqknuf View Post
    Looking for some help/input on tire sizes to run on my ETA. Borbet Type B mesh, 16x7.5 et 30. Running H&R Sport with Bilstein Sport. Not big on the stretch look - 215-45 ? Thoughts ?
    You'll need spacers to clear the front struts. Once you do that, the rears will look sunken in. I recommend 10-15mm spacers all around, and that size tire is fine.

    Comment


      Originally posted by phreshkid View Post
      So I went ahead and grabbed a full set of 225/45-16 BF Goodrich KDW2s to fit on my 16x8 et23 style 5 wheels.

      From what I've gathered, I need a bare-minimum 3mm spacer up front to clear the front caliper but 5mm is recommended. I have already rolled the rear fenders but have yet to get the fronts done.

      et23 plus a 5mm spacer puts me at et18 with 225 tires.

      How am I looking in terms of fitment? Does the front absolutely need a roll? What about the rear fitment? I'm thinking that if I throw a 5mm spacer in the back too just to balance out the front spacer things shouldn't be bad right?

      Also, the car is lowered on GC/Bilsteins. I don't ride on the lowest settings by any means either.
      5mm all around will be fine with rolled rear lips. Nothing needed for the front arches.

      Comment


        Originally posted by 5ickride View Post
        Thanks for the help. What 205 50 15 tires do you recommend? Looking for summer only not all season.
        You'll have to tell me a lot more about what you want from the tires. Daily driving? Track? Rain? Treadwear expectancy? etc...

        Comment


          Originally posted by Ryan... View Post
          16x8, et0, lowered 2.5" fr and 1.5" rear. Can I get away with either 205/50 or 205/45 without any major rolling/pulling of the fenders?
          Nope. They don't fit.

          Comment


            Originally posted by Chrisv006 View Post
            Will 15x7 euroweaves with 205/50 require rolled fenders with a lowered car?
            Not even close, even with 225/50 tires.

            Comment


              Originally posted by darvo View Post
              17x8.5 style 39's et20, 4x100 to 5x120 18mm spacer..... Will this fit? with what tyre? 1986 325e sedan, Jom Coils.
              Will not fit.

              Comment


                Originally posted by Mystikal View Post
                You'll have to tell me a lot more about what you want from the tires. Daily driving? Track? Rain? Treadwear expectancy? etc...
                Sorry about that: Weekend/Sunday car, no track or auto cross...just want to chill and enjoy. I might do some spirited driving but nothing too crazy. Oh and it would be summer tires not AST.

                Thank you.

                Comment


                  Originally posted by Mystikal View Post
                  5mm all around will be fine with rolled rear lips. Nothing needed for the front arches.

                  Would I be able to run a 7 or 8mm spacer on the rear with my setup that you just answered today?
                  world renown Harry Potter expert
                  sigpic

                  Comment


                    16x7 et20 with 205/45's. I want them flush and I'm willing to roll and do a very slight pull. I'm thinking 20-25mm spacer?

                    Comment


                      Originally posted by Mystikal View Post
                      Not even close, even with 225/50 tires.

                      Thank you very much - 225/50 it is then :)

                      Comment


                        Originally posted by Mystikal View Post
                        You'll need spacers to clear the front struts. Once you do that, the rears will look sunken in. I recommend 10-15mm spacers all around, and that size tire is fine.
                        Thanks.
                        I guess I should have done some better research, looks like I have very limited selection in a 215-45. I'm to assume that a 225-45 will have the same outcome regarding the recommended 10-15mm spacers. Wanting it to look agressive without the tires looking like there on steroids. I'm guessing a 205 on a 7.5 will have a bit of a stretched look ??
                        sigpic

                        Leave Feedback here:

                        http://www.r3vlimited.com/board/showthread.php?t=261541

                        Comment


                          Originally posted by 240zs30 View Post
                          Nice! is the E30 m3 suspension or E36m/318ti?
                          e30 m3

                          Comment


                            Originally posted by 5ickride View Post
                            Sorry about that: Weekend/Sunday car, no track or auto cross...just want to chill and enjoy. I might do some spirited driving but nothing too crazy. Oh and it would be summer tires not AST.

                            Thank you.
                            Fuzion zri, Yokohama s drive, BFG g-force sport, Kumho XS, Falken 615K. All great choices, the last 2 will wear much quicker but provide the most traction.

                            Comment


                              Originally posted by phreshkid View Post
                              Would I be able to run a 7 or 8mm spacer on the rear with my setup that you just answered today?
                              May need a slight pull on the fender.

                              Comment


                                Originally posted by Highway1 View Post
                                16x7 et20 with 205/45's. I want them flush and I'm willing to roll and do a very slight pull. I'm thinking 20-25mm spacer?
                                Sure, maybe 15 front 20 rear.

                                Comment

                                Working...
                                X