ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
So I went ahead and grabbed a full set of 225/45-16 BF Goodrich KDW2s to fit on my 16x8 et23 style 5 wheels.
From what I've gathered, I need a bare-minimum 3mm spacer up front to clear the front caliper but 5mm is recommended. I have already rolled the rear fenders but have yet to get the fronts done.
et23 plus a 5mm spacer puts me at et18 with 225 tires.
How am I looking in terms of fitment? Does the front absolutely need a roll? What about the rear fitment? I'm thinking that if I throw a 5mm spacer in the back too just to balance out the front spacer things shouldn't be bad right?
Also, the car is lowered on GC/Bilsteins. I don't ride on the lowest settings by any means either.Comment
-
Comment
-
Thank you.Comment
-
Comment
-
I guess I should have done some better research, looks like I have very limited selection in a 215-45. I'm to assume that a 225-45 will have the same outcome regarding the recommended 10-15mm spacers. Wanting it to look agressive without the tires looking like there on steroids. I'm guessing a 205 on a 7.5 will have a bit of a stretched look ??Comment
-
-
Fuzion zri, Yokohama s drive, BFG g-force sport, Kumho XS, Falken 615K. All great choices, the last 2 will wear much quicker but provide the most traction.Comment
Comment