Announcement

Collapse
No announcement yet.

ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    ok i am running 16x7" all around.
    et33

    have 205/16/45 up front and on rears.

    what do i have to do to run 225/16/? on the rear?

    im thinking spaceing it 15mm and rolling the fenders and i should be good...thoughts?

    Comment


      Has anyone stretched Yokohama Advan AD08 tires? I've heard they run about 10-15mm wider than they claim. I was thinking about going with a more narrow size in these. Just worried about the metal band in the sidewall and them being too stiff. I've been searching and can't find any pics of these tires stretched. It's not too much stretch, wondering if I can get away with it and the tires not get destroyed. Think I've read somewhere about someone stretching them pretty aggressively and they ended up tearing to shreds. They're a little too pricey for them not to work out. 'Preciate the help.

      Edit: Going with bfg kdw 2, they run a little wide and come in 205/40 and 215/40. Should work out nicely, hope the noise isn't a problem tho.
      Last edited by e30slidewayz; 10-10-2011, 08:56 PM.

      Comment


        16x9 borbet type t's. Et30.

        What do I need to get these to fit?

        I'm on BC coilovers.

        Comment


          This is for my e30. .. I'm running e30m3 suspension with after market springs. ....

          I want to run a set of BBS RK 15X7 ET 35 ....

          I was running m systems with 215/40r17 ... and they rubbed in the back


          Comment


            195/45/16 or 205/45/16

            16x8.5 et13

            '89 BMW 325is | '02 Mitsubishi Montero Limited | '2005 GMC Sierra 2500 Duramax | 2007 BMW M5
            my feedback thread

            Comment


              Hey guys, I've got BBS RA's: 6j x 15 x H2 (what does H2 mean?)
              it also says "253 ET30" on it...don't know what that means either.

              What's the widest I can run on em, what sidewall height do you guys recommend and should I put thinner tires up front? I think I have 205/50/15 on the back and 195/50/15 on them right now.

              Oh, also, what brand and type of tire do you guys suggest? Should I search around for a used set or should I get brand new?

              That's a lot of questions, but I didn't want to get flamed for starting a new thread.

              Thanks
              1985 325e
              mods:
              Powerflex CABs
              MOMO Corse Exhaust
              euro bumpers with BBS front spoiler
              e36 m3 shifter
              uuc clutch stop

              Comment


                What size tire for a 16x7.5 with either a 0et or 5et (offset of rim is either 20 or 25, I dont recall, and I will be running 4x100 to 5x120 adapters). Car is sitting on H&R race springs with 15mm drop hats.

                Thanks.

                Comment


                  15x7.5 et30 with 205/50 r15, sound good?

                  Comment


                    Holy crap, I forgot about R3V for over a month there. I'll start with the posts from the past week, if you posted prior to this and still need an answer quote it and I'll be back asap. Thanks guys.

                    Comment


                      Originally posted by e30slidewayz View Post
                      The time has come to purchase tires for my 17x8 and 17x9 filled and redrilled style 5's. My current setup is koni adjustables with H&R sports. I'm ditching the springs for a set of these.. . http://www.r3vlimited.com/board/show...over+group+buy. I'm going with the 400f/600r spring rates (I think). I'm also going with the camber plates offered. I've been asking around for what tire sizes would suite my needs. I want a flush stance, might need some small spacers to dial it in. As for the tires, I'm looking for a slight stretch, nothing to compromise the integrity of the tire. I also want equistretch. I'm thinking a 225/40 or 45 in the rear with a 215/40 or 45 or 205/40 or 45 up front. Will the 45's rub? Is the 205 too skinny for the front? I've been using this site to determine what sizes have similiar stretch.. http://www.willtheyfit.com/index.php...&Submit=Submit. I've been looking for pics of similiar wheel setups on an e30 but haven't had much luck finding what I need. Any suggestions and/or pics are much appreciated. Thanks guys.

                      edit: the rear fenders are already rolled
                      edit #2: think I'm going with 215/40/17 or 205/40/17 front and 225/40/17 rear... who the hell makes a good 225/40?
                      There are no 225/40s worth buying.

                      205/40 front 225/35 rear is your best bet.

                      Comment


                        Originally posted by RedheadedBastard View Post
                        Sorry if this is a repost but 300+ pages is a lot to get through. LOL
                        I'm seriously concidering 16x8 Rota RB's et20 57.1 center bore. Will I need to roll my fenders at all for these to fit? If so what is the widest tire size I can mount on them; again with out any modifications to the fenders. I just ordered a set of H&R sport springs & Bilstein Sports for the car as well. Figure that may be important since it should drop the car 1.3 inches or so.
                        205/50 is the biggest. Even still, it's going to be a close call with the rear arches. 205/45 is guaranteed to work.

                        Comment


                          Originally posted by Mullet Bullet View Post
                          what about style 4's with adapters? how would they fit, not really looking for herra frush but more of a meaty tire. suspension is billi's and H&R sports
                          Flush is the only option. Style 4s with adapters are 0 or below offset.

                          Comment


                            Originally posted by Aerton View Post
                            I need your input on this. I was wondering if I can create a staggered look with 7.5" rims by going 205 50 16 up front and 225 50 16 rears. The car is a 93 convertible sitting on Bilstein Sport and H&R Sport. Tires I'm thinking of getting are Conti DWS all season tires. These are the wheels I'm fitting on the car.

                            225/45/16 is what you want. I'd need to know the offset of the wheels first.

                            Comment


                              Originally posted by devon.818 View Post
                              ok i am running 16x7" all around.
                              et33

                              have 205/16/45 up front and on rears.

                              what do i have to do to run 225/16/? on the rear?

                              im thinking spaceing it 15mm and rolling the fenders and i should be good...thoughts?
                              225/45/16 should fit without spacers, but I'd rather go 15mm spacers all around with rolled rear arches.

                              Comment


                                Originally posted by jaywood View Post
                                16x9 borbet type t's. Et30.

                                What do I need to get these to fit?

                                I'm on BC coilovers.
                                15mm spacers might be enough with the BCs, but 20mm to be safe. Run that size all around for even fitment, along with 205/45 tires.

                                Comment

                                Working...
                                X