ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Randy2400]

With spacers, only 215/40. Without spacers, 235/40.

But I'm using 235/40/17 with spacers right now

[Mystikal]

But I'm using 235/40/17 with spacers right now

Sweet, then try bigger if you'd like.

[Randy2400]

Sweet, then try bigger if you'd like.

And for my snow tires can I use 225/55/17 and raise the car a bit?

[g.ruff561]

What 16 inch rim, tire, et, would you recommend for the E30 front only. I am looking for as much lip as I can get with no rub lock to lock, no mods, roll or spacers. Car is on h and r sports.

Thanks......................................... G.

[Mystikal]

And for my snow tires can I use 225/55/17 and raise the car a bit?

Not a chance.

[Mystikal]

What 16 inch rim, tire, et, would you recommend for the E30 front only. I am looking for as much lip as I can get with no rub lock to lock, no mods, roll or spacers. Car is on h and r sports.

Thanks......................................... G.

16x9 +10 205/45

[robgoesvroom]

Would appreciate your advice here - I'm trying to estimate what size spacers I would need for a 15x10 square setup on a late model E30. The intent is to use 245 width tires. I think they would only be necessary for the front, do you have a recommendation?

I'm aware that fender pulling will be necessary and possibly flares. Trying to see what I can pull off with just fender pulling.

Thanks Mystikal!


Sent from my iPhone using Tapatalk

[Dirti]

what offset does one need with 16x8 all around to sit lip to fender flush on bags?

[jules325i]

In the market to buy some wheels for my 325i 1989 race car, which has 400hp soon to be more.
The car is sitting on H&R race springs.
Im looking to run 245/40/17 or 255/40/17 allround
I'm looking to go 17x9 (with flares)
I like these

http://www.outmotoring.com/mini-cooper/mini-cooper-team-dynamics-pro-race.html

I'm planning to run huge big brakes aswell.
What offset would be best to purchase.


can you run 255/40/17 on and e30 with KAMOTORS standard flares

[Rickaytan]

What would I need to fit 4x100 16x9 et23 wheels with a centerbore of 73.1? I have ground controls and I am slightly lowered about 2 inchs.

[gordie]

Kind Sir, what offsets for 17x8 and 245/40/17 with rolled fenders and maybe pulled a bit, lowered 50-60mm

Edit: btw the big attraction for this size is hand-me-down r spec tires from a racer dad's workshop supports.

[RegularEverydayETA]

I'm sure it's been covered already but I can't seem to find it. Need to know what's size tires and spacers to use with 16x8.5 et32 Salad shooters. I don't want to roll fenders

Whatever.......

[Mystikal]

Would appreciate your advice here - I'm trying to estimate what size spacers I would need for a 15x10 square setup on a late model E30. The intent is to use 245 width tires. I think they would only be necessary for the front, do you have a recommendation?

I'm aware that fender pulling will be necessary and possibly flares. Trying to see what I can pull off with just fender pulling.

Thanks Mystikal!


Sent from my iPhone using Tapatalk

245 15" tires exist? -5 front, +10 rear is necessary. Flares, too.

[Mystikal]

what offset does one need with 16x8 all around to sit lip to fender flush on bags?

Depends on front camber, but +5 front -5 rear is a good start.

[Mystikal]

In the market to buy some wheels for my 325i 1989 race car, which has 400hp soon to be more.
The car is sitting on H&R race springs.
Im looking to run 245/40/17 or 255/40/17 allround
I'm looking to go 17x9 (with flares)
I like these

http://www.outmotoring.com/mini-cooper/mini-cooper-team-dynamics-pro-race.html

I'm planning to run huge big brakes aswell.
What offset would be best to purchase.


can you run 255/40/17 on and e30 with KAMOTORS standard flares

Get them in +15. Should work with the flares.