Originally posted by TrentOSU
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by Mystikal View PostNo. I always recommend coilovers on E30s, especially BCs.sigpic87 325E The Honey Badger
Comment
-
Year, Model, Suspension, All Relevant Wheel Data (Diameter, Width, Offset, Bolt Pattern, etc)
1989 325i, Ground Control Stage 2+? coils, 500/600. Looking to run a 17x8 Apex wheel.
What's the widest tire I can run, and what offset would I want the wheels to be to achieve that? Trying not to stick out the sides of the car, planned on rolling the fenders.. Hopefully this isnt too vague of a question
Thanks!
S
Comment
-
I'm getting real confused. I'm looking at 15x7s on 205/55 tyres, but what offsets can I have? Some seem to be running as little as +15, but then I've seen up to +38. I want to keep the rolling circumference as close to stock as possible to avoid issues with fitment, just unsure on offsets.
Also, there's a good chance this has been answered, but there's 500 pages. Thanks in advance.
Comment
-
Originally posted by Bullhead View PostCan a 245/40 17 fit? sorry for the questions Mystikal I am just looking at my options. And what's the widest you can go in the rear with a full roll on the 17's?
Comment
-
Originally posted by ScottCantStop View PostYear, Model, Suspension, All Relevant Wheel Data (Diameter, Width, Offset, Bolt Pattern, etc)
1989 325i, Ground Control Stage 2+? coils, 500/600. Looking to run a 17x8 Apex wheel.
What's the widest tire I can run, and what offset would I want the wheels to be to achieve that? Trying not to stick out the sides of the car, planned on rolling the fenders.. Hopefully this isnt too vague of a question
Thanks!
S
Comment
-
Originally posted by Reignity View PostI'm getting real confused. I'm looking at 15x7s on 205/55 tyres, but what offsets can I have? Some seem to be running as little as +15, but then I've seen up to +38. I want to keep the rolling circumference as close to stock as possible to avoid issues with fitment, just unsure on offsets.
Also, there's a good chance this has been answered, but there's 500 pages. Thanks in advance.
Comment
-
Originally posted by blk90e30 View PostLooking at a set of wheels, I know its a long shot and i will need spacers but im having trouble figuring out what size to go with. 90 325is St lowering springs and billys. 215/45/16 dunlop direzza dz101 tires 16x7 et 40.
Comment
-
Originally posted by jrockbk View PostI'm on coilovers, currently on 225/40/17 all around but tires are not made anymore thinking of going 245/35/17 in rear. Wheels are 17x7.5 et28
Rear wheel with no spacer and my fenders are rolled and 750lb rear springs. Think I can do 245/35 in rear if I raise it a little?
Comment
Comment