Originally posted by Reub_e30
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by potatomash View PostHey guys
Just got these volk 17x8 17x9's for the e30. Offset is 36 so will be getting spacers, but what is the biggest size tyre i can fit with serious guard rolling and what kinda offset would allow that. I need grip so was hoping 235/40 in the back and 215 or 225 in the front if poss!
Comment
-
Originally posted by sonomabimmers View Posti did more searching on your thread specifically and i think these wheels are not for me with the conditions i just described huh? my next question is if i went with this set up how much would i need to roll my fenders thank you.
P.S. did you buy that car from a R3V member? I remember a guy named Aaron in CA with an identical super clean cabrio on here about a decade ago.
Comment
-
Originally posted by marek|steezkal View PostSoooo my buddy will be upgrading his wheels/tires on his 330ci so I may be able to buy his style 72's for a good price.
I doubt anyone has run these since they are a staggered setup F: 18x8 et47 R: 18x8.5 et50 72.6 CB.
Any chance these could fit with 18 or 20mm adapters and additional spacers and fender roll? They just looked so good when we rolled the wheels up next to the E30, I had to ask.
Thanks.
[IMG][/IMG]
Comment
-
Originally posted by alas View PostProbably has been covered but:
Would (E38 Style 5's) 16x8 ET20 + 18mm adapters run fine on Bilstien B8's + H&R springs?
205's or 215's?
How will the wider track up front alter the steering feel?
Comment
-
Originally posted by McWattersJ View PostHey I am looking at 15" 8.5 with et17.. I believe the bore is 73.1.
i was thinking 215-225/50's on my early model Vert with stock suspension. I like the poke look so if possible I would push them out more.
Yes I am a newb. Any thoughts? advice?
cheers
Comment
-
Originally posted by Mystikal View Post12mm front spacers with 215/40s. 5mm rear spacers with 235/40 or 245/35. Done!
Sent from my HTC One M9 using Tapatalk
Comment
-
From browsing through this thread, it would seem I have 3 tire size choices. I'm just not sure which one would work the best. Car is a 1992 vert lowered on Ground Control Coilovers with offset CABs. Wheels I want to eventually fix and put on are 16x7.5 ET25 all around (Racing Dynamics RGP's). From what I have read, 205/50, 215/45, or 225/45 should fit. I just wasn't sure if I would have rubbing issues with any of these tire sizes since the car is lower than stock.
Thanks!Current: 2011 M3
Retired: 1986 325e, 1991 318i, 1991 325ic, 1992 325ic, 1998 528i, 2002 325xiT, 2003 530i, 2005 325xiT, 2008 335i
Comment
-
what will it take to fit these - front 16x7 et55 rear 16x8 et52
stock ride hight early model e30 - what would it take and is it feasible ? if so a tire size would be helpful as well - thanks in advanceLast edited by achtung-e30; 04-21-2016, 05:33 AM.
Comment
-
I'm cutting my fenders and putting the DTM flares on. I've ordered 15x9 with a 5 1/2 in backspace for the front and 15x10 with a 6 in backspace for the rear. I'm trying to figure out how wide of a tire I can fit on it in the rear and what will be functional in the front. This is for my turbo m52 build.1987 325 project
Comment
-
Currently have a square set of 16x8 e38 weaves "style 5" and they are redrilled to 4x100 et23 offset is the offset I believe. Sitting on Megan coilover's, I probably need to run a spacer up front. But I want to run a meatyish setup, I'm wondering if a 215-45-16 will fit and not rub? My fenders are not rolled or pulled.
Comment
Comment