Got the 5.3 out of a 2003 Silverado. And cleaning up engine bay. Getting rid of the LS7 cam, probably going to go with something a bit more aggressive.
Announcement
Collapse
No announcement yet.
ar design: E28 LSx Turbo Build
Collapse
X
-
Update..... Got the motor apart. Regapping the top rings to .026. They are .015 currently. Bottom rings are fine, no need to re-gap. Broke one of the OEM rings, had to get a set of new ones, $49. OEM pistons were FILTHY. So much carbon. And the oil control rings were totally gummed up / frozen. Once finished re-gapping rings, installed some ARP2000 rod bolts (pre-01 motors have weak rod bolts), got a Weldon 2035 pump and a Weldon 2040 FPR off eBay. And my Tex Racing T101 showed up today! Turns out the seller DID include the shift linkage ($$$) and all I need is a shift rod. W00!
Right now, shopping for a NASCAR triple plate clutch on eBay.
Last edited by dubseven; 11-15-2012, 06:08 PM.
Comment
-
wow, this will be super awesome when its done. i am in the process of doing this to another car right now (84 regal t-type, 4.8, ls9 cam, garrett 67mm rear mount setup), but i have barely started, and i have a e28 sitting in my driveway that needs a motor...Last edited by ieatpeople; 11-16-2012, 01:31 PM.Originally posted by BillBraskyThat's like Vlad challenging Chip Foose to a car painting contest.Originally posted by acolella76i'm pretty sure 'Phillis' is short for syphilis
1994 tercel, 5efhe swap, i/h/e
1984 t-type, 5.3/th350 swap in progress
My newest addition:
Rebecca Arlene, born 4/19/2013
Comment
-
Billet Alternator flip kit from LS1Brackets.com
Triple disk Quartermaster 7.25" clutch, NASCAR takeoff, $180 FTW!
NGK Spark Plugs $2/ea
Lakewood Bellhousing for transmission... SFI Certified
Heads back from machine shop. Springs/retainers installed, decked, cleaned up, installed height checked, etc. $226.
Installing eBay head studs. LOL
Welded 10AN return fittings to the GTO pan
Dem ports iz HUGE!
Headgaskets installed
And I purchased a sweet Southbend manual lathe. Its a beast!
Comment
-
More progress!!!!!!!!!!
Engine and transmission are mated......
Getting ready to go in.....
Come to papa!
Almost there.....
Transmission ended up needing more room. So....we decided to give it more room!
And its in!! Engine mounts and transmission mounts are done, pics of those when I get them out of car. Engine mounts are available for sale.
GTO oil pan fits perfectly, no mods!
Taking undercoating off to weld new tranny crossmember in....
Fabricating a new tunnel, and pushing the firewall back to make room for the exhaust.... ;)
Flanges for tunnel to attach to via DZUS fasteners.
Intercooler core... its HUGE! 4.5" thick!
Random.
Comment
Comment