After 10+ years and a good amount of work I almost burnt my car to the ground. 1987 325is that I poured a lot of work into and daily drove it for nearly 100k miles. S52 swap, rebuilt a lot (diff, brakes, suspension etc). I had a catch can mounted in the engine bay on the metal above the drivers side wheel well. One of the mounting screws popped loose allowing it to rest against the thick cables of wires that are part of the body wiring harness that runs along the drivers side part of the engine bay. One day I came out to a dead battery. I thought it was odd but nothing too crazy. I then fired it up and half my cluster wouldn’t illuminate. I went to pop the hood. The release latch wouldn’t open it. Now the problems are starting to add up in a strange way. When I opened the hood I saw it. The hood release cable was burned as was a 10” section of the body harness.
soooooo I’m assuming the front body harness doesn’t separate from the rear at all. Body harness replacement time? Anyone have a spare for a chum in need?
soooooo I’m assuming the front body harness doesn’t separate from the rear at all. Body harness replacement time? Anyone have a spare for a chum in need?
Comment