Rear license plate screw size?

[sna77]

Hi all,
I'm having no luck matching the rear license plate screws. My car came with 2 (that fit), and I'd like to add 2 others (well, really, I'd like to replace them with 4 stainless screws, but I'll settle for another matching pair for now...)

According to realoem, it should be this:
07143448498 Fillister head self-tapping screw ST4,8X16MM
https://www.realoem.com/bmw/enUS/sho...37#51181821830

I ordered those, they didn't fit.

So I took the screws that were holding the plate on, went to the hardware store, and wasn't able to match the size/thread (ugh).

This is what my plate holder looks like (is this even OEM)?

Thanks for any help. Much appreciated

[Jaxx_]

I replaced mine with 10-24 screws. Mine were similar from what I recall, just plastic inserts for the screws to grab

[sna77]

I replaced mine with 10-24 screws. Mine were similar from what I recall, just plastic inserts for the screws to grab

thanks. I'll give it a try

[Vincenze]

Most likely, you need to replace the plastic inserts first.

https://www.realoem.com/bmw/enUS/sho...62#51181852299

51181852299

[sna77]

thanks, will order some of those too

[WestCoastEta]

I replaced mine with M5 x .8 bolts from the hardware store and they did the trick

[sna77]

I replaced mine with M5 x .8 bolts from the hardware store and they did the trick

I tried those--because that's exactly what I use on my e46--and they did not fit. I'm thinking my plastic retaining nuts are not original and just some generic thing. Ordered the OEM retaining nuts and will try again.

[sna77]

I replaced mine with 10-24 screws. Mine were similar from what I recall, just plastic inserts for the screws to grab

That did it, thanks! Bought these stainless ones from Amazon, and voila!
https://www.amazon.com/gp/product/B08BCHH3XQ/