E30 CEL Lamp

[Enriquez2000]

I have the project car finally running but I realize there is no CEL when turning ignotion on. I took the cluster(actually both clusters I have) have no lights in the cel slot.

Was hoping someone can help with what I need to make that light up. The etk was not showing me what I need amd am hop8ng for help

1989 e30

[e30davie]

You might want to specify which year and engine.

The early cars dont even have a cel on the jetronic.

[Enriquez2000]

You might want to specify which year and engine.

The early cars dont even have a cel on the jetronic.

Sorry fixed that above... 1989 e30. There was no light in mine but i have the grn/wht and brown wires to power it up

[82eye]

Sorry fixed that above... 1989 e30. There was no light in mine but i have the grn/wht and brown wires to power it up

is this for your m50 swap or an m20? the answers will change depending.

[Enriquez2000]

is this for your m50 swap or an m20? the answers will change depending.

Its the m50 swap but it uses the e30 chasis harness inside so should be same

[82eye]

Its the m50 swap but it uses the e30 chasis harness inside so should be same

did you double check the pinout between them? there are a few differences over the years.

edit: to clarify i'm wondering if the m50 ecu is looking for a missing signal from a deleted or incorrectly pinned sensor.

[Enriquez2000]

did you double check the pinout between them? there are a few differences over the years.

edit: to clarify i'm wondering if the m50 ecu is looking for a missing signal from a deleted or incorrectly pinned sensor.

Pinout is good. Bulb is just burned out.

I was able to pull the abs bulb and check both with a AA battery and its just burnt out.

Need to know what bulb goes in the holder

[82eye]

Pinout is good. Bulb is just burned out.

nice catch. gotta love when it's a simple fix.

Need to know what bulb goes in the holder

should be a w1.2w - osram/sylvania 2721

[Enriquez2000]

nice catch. gotta love when it's a simple fix.





should be a w1.2w - osram/sylvania 2721

Awesome thank you! I was digging around and saw some posts with that mentioned but no confirmation.

Ill circle back when I get the bulbs and replace to confirm fitment

[Enriquez2000]

This is correct part number!


Now does anyone know which wires go here... i have cel and what I believe to be abs but no leads for this