Interest in a rally/driving light bracket for E30's?

[graveshaker]

I'm in for a complete set.

[brantleyr]

BTW do you have a picture of how these work at night? Interested in coverage area, how directional and bright are they?

[nespo_e30is]

when this is ready, I will take two! Lights not needed though... great job!

[dinanm3atl]

Nice. Very interested :)

[bimmer_E30]

a toggle switch is included so you could have them on when ever you want.

that rad!!!!

[325ixE30]

here's what I would try to include in a full rally light kit(thats still the prototype bar pictured, and probably the white covers for the lights).

:up:

[kamotors]

lol i mean get the lights to work with the foglights? or maybe highbeams?

a toggle switch is included so you could have them on when ever you want.

[bimmer_E30]

lol i mean get the lights to work with the foglights? or maybe highbeams?

[kamotors]

also u should put a write-up on how to install these haha and get the lights hooked up!

i am down for one as well.

will do, and the bracket its no harder than installing a license plate:)

[bimmer_E30]

also u should put a write-up on how to install these haha and get the lights hooked up!

i am down for one as well.

[george graves]

That's hella tight!

[kamotors]

here's what I would try to include in a full rally light kit(thats still the prototype bar pictured, and probably the white covers for the lights).

[325ixE30]

Well put me down for one!

[kamotors]

http://www.r3vlimited.com/board/show...7&postcount=69


Front side is welded but the backside where the plate meets the metal tubing it is not welded. Production model will be welded all the way around where it meets?

its welded on top and underneath, but if you would like all sides welded i will do that, I tried for an hour to brake off a flange that I welded a little crooked and I simply couldn't, with the way its currently welded you won't have any problems.

[Fidhle007]

the new hole is only 1mm lower,and the light now sits about 1mm lower and little more forward, it not a noticeable difference until you open the hood.
pics

its just enough to clear the hood.

Ah, understood, I thought that was a new bracket. I'll still take that if you want to sell, I have some ideas I want to work on for my IX but no time to fab.