Whats Wrong with Your Car?
Collapse
X
-
Ok here we go.
- driver side door lock mechanism is sticking... (maybe needs to be aligned?)
- need new front/rear pads (20k miles on street pads)
- idle shoots to 2k-2.5k on start ups (hopefully new gaskets/o-rings for injectors will fix this)
-need to install heater core/valve/lines.
-need to install inner door water protection sheets
-need to plug all the holes in the rear valance/trunk areaLeave a comment:
-
List of shit wrong/things I don't like about my car?
Fuuuuuuuuuuuck, I can't type all that.Leave a comment:
-
-LF wheel bearing grinds/rattles
-No AC
-P/S pump is dying
-driveshaft has clicky joints
-All four shocks are shot
-No parking brake on the LR
-No radio
-dash cracks
-Ball joints and/or CABs
-Steering rack leaks
-needs new ignition wires
-stock susp/wheels/slushbox
-RF tire is rubbed down to the wires!
:(Leave a comment:
-
Needs brakes.
o2 senser.
blown shocks.
needs spark plugs
plug wires
d-cab
stock 4X4 suspensions
Ac recharge
fog lights
new fender + paint
timing belt and water pump
oh and its an ETA
Leave a comment:
-
my brakes suck - still using the same pads I killed at a track day earlier this summer. master cylinder is mushy, front right caliper is stuck and dragging, pads are glazed over and my rotors are pitted. However I just spent $300 to remedy that problem. :)Leave a comment:
-
Oh this is a fun thread...from 2004
-Hood dent
-Door dings
-Quarter panel dings
-Dirty as shit
-Crazy gas gauge
-No A/C
-No Power steering
-Needs RTABs
That's about it...:) I still love my m30 and it's torque.Leave a comment:
-
-Plastic bumpers discolored. way darker than the rest of the car
- rear valance needs replacing
- Knee bolster needs replacing
- Cracked right foglight
- Bottle caps...Leave a comment:
-
blower motor making noise
valves need adjusting
exhaust nearing the end of its life
sloppy shifter
rear wheel bearing
I still drive it everyday, though!Leave a comment:
-
My brake light switch has been out for a while. I should probably get on that. Also, my AC switch won't stay in. I have a new switch - I just haven't put it in.Leave a comment:
-
i think a better question would be what is good with the car?
in my case, i need-
a new fender
body work on the rear quarter
lots of wiring work done
valve adjustment
tires
an alignment
a tie rod on the pass side
lots more that i dont feel like listingLeave a comment:
-
-torque, or lack there of
-revs, or lack there of
-lackluster throttle response
-sewing machine sound
-stock suspensionLeave a comment:

Leave a comment: