Announcement

Collapse
No announcement yet.

Summer plans. Thoughts?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Summer plans. Thoughts?

    Here's what I have planned for the summer:

    New clutch
    Oring block (probably)
    Head gasket change
    Megasquirt pnp
    Timing belt
    More boost


    For all of you guys who have done that ^ I know you can keep the engine/tranny in the car, but would it be easier to pull the engine/tranny and replace things on an engine stand? I already have a cherry picker and an engine stand. Just looking for the easiest way to do all that. If I pull it I can clean up the block and what not, that would be a plus. It could use a good cleaning.



    Keep engine and tranny in car, or pull both?

    Thanks guys ;)

    #2
    I would pull it just to clean everything and it would also make the work easier.

    Comment


      #3
      Pull it. It isnt a whole lot more on top of the head coming off, and you wont be crouched over.
      1987 Delphin 325e Sedan - Natalie
      1990 325i 24v
      1997 Chevrolet K1500 Crew Cab 4x4 - The Centurion

      Comment


        #4
        Leave it in, the hours spent removing and installing could be put towards all the work you have listed.
        ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

        Instagram: @BWeissLeather

        Current cars:
        ~ '87 325 M30B35 swap
        ~ '87 535
        ~ 01 540 Msport 6spd
        ~ '06 X5 4.8is

        Comment


          #5
          Pulling it would be a plus. The extra work will pay off if you're looking to clean everything and look good once its all back in the car.

          1992 BMW 325iC
          1978 Chevrolet Monte Carlo
          1965 Chevrolet Corvair Monza 140hp

          Comment


            #6
            Pull it, much easier to get to everything on the block and route coolant and wiring. I would invest in the m3 wire cover and bay shave to be extra ballin :)



            Comment


              #7
              I'd pull the engine. Heck I pull the engine & transmission just to change a clutch. If you know what you are doing and have the right stuff and engine/trans pull or install can be done in a bit under three hours.
              The car makes it possible, but the driver makes it happen.
              Jim Levie, Huntsville, AL

              Comment


                #8
                yep. pull the engine

                Turbo M42 Build Thread :Here
                Ig:ryno_pzk
                I like the tuna here.
                Originally posted by lambo
                Buttchug. The official poster child of r3v.

                Comment


                  #9
                  Pulll outtttttttttt


                  Project log -- DIRTY 30

                  2.7i * Megasquirt tuned * E85 powered

                  Comment


                    #10
                    just spit on her back and tell you pulled out


                    but in the case of the engine...why the hell not yank it if you have the means to
                    Swanny!
                    SUCKERS.

                    Comment


                      #11
                      Thank you guys.

                      Looks like I'll be pulling it!

                      Comment


                        #12
                        Originally posted by jlevie View Post
                        I'd pull the engine. Heck I pull the engine & transmission just to change a clutch. If you know what you are doing and have the right stuff and engine/trans pull or install can be done in a bit under three hours.
                        Takes me 3 hours just to remove a heat shield...but I do a really good job of it
                        Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

                        https://www.r3vlimited.com/board/sho...86#post4944786
                        Alice the Time Capsule
                        http://www.r3vlimited.com/board/showthread.php?t=360504
                        87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

                        Comment

                        Working...
                        X