Announcement

Collapse
No announcement yet.

Air Induction Systems, Voodoo, and simple test

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    samco will pretty much fab any elbow you require for the price.

    Comment


      #47
      Originally posted by NC325iC View Post
      the faster its going when it gets to the runners the faster it will be through the runners
      Thats what one would think, but again, vacuum and boost are very different systems.

      If it takes energy to move air, the energy to move air in a boosted system comes from the compressor. And you'd think equally, the force to move air into a vacuum (on NA engine) is based on the positive pressure outside the vacuum but its not. Its from the greater negative value which is at the valves.
      And yes, the faster air moves in to fill the runners with air, the better, but the previously suggested theory about velocity a mile down the intake system is a bad one. It doesnt matter how pretty the tubes are, if they are choked up, its like sucking a golf ball through a garden hose.
      That blue boot looks pretty darn good actually, if its for the m30 AFM. But at its most critical point, the bend, it gets pinched. Needs to be larger.
      Last edited by xLibelle; 11-24-2008, 07:11 AM.

      Comment


        #48


        i thought the ribs in the boot were there to fix what you are talking about meaning the laminar flow interuption at the bend or is this not the case?

        i am following you on the whole concept and certainly wouldnt argue with you on it (even if nobody else knows your qualifications i do) but can you offer a definitive explanation and solution.

        Comment


          #49
          I just want a pretty red or blue hose that looks cool, and fits the same color scheme as my bitchin' cold air intake.

          I heard that those new super low friction throttle cables give you quicker response too. As long as it is the same color, I want one!

          Closing SOON!
          "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

          Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

          Thanks for 10 years of fun!

          Comment


            #50
            Originally posted by BMWLA View Post


            i thought the ribs in the boot were there to fix what you are talking about meaning the laminar flow interuption at the bend or is this not the case?

            i am following you on the whole concept and certainly wouldnt argue with you on it (even if nobody else knows your qualifications i do) but can you offer a definitive explanation and solution.


            Comment


              #51
              fuh raze cheeze grater?
              ______________________
              ex-Chief Operating Officer
              Blunt Tech Industries
              West Coast and Pacific Rim

              Comment


                #52
                OH and which modification were you talking about, the slight poerformance gain at cost of noise reduction? do tell

                Swiss cheese airbox?
                Last edited by Stephen; 11-24-2008, 01:27 PM.

                Comment


                  #53
                  You mentioned something about intake mods for an M42. Care to elaborate?

                  Project M42 Turbo

                  Comment


                    #54
                    Originally posted by gearheadE30 View Post
                    You mentioned something about intake mods for an M42. Care to elaborate?
                    +1

                    is that the twin injector + itbs you were doing or something else?

                    Comment


                      #55
                      Why can't you show the full math behind all of your products? I know I couldn't interpret it, but there are a few on here that could. What is stoping you from proving yourself?

                      Comment


                        #56
                        Originally posted by Schneider325 View Post
                        Why can't you show the full math behind all of your products? I know I couldn't interpret it, but there are a few on here that could. What is stoping you from proving yourself?
                        there is a pattern to it i think its either 1 he thinks were all knuckle heads or 2 he doesnt care or 3 all of the above or 3a tired of getting riped off

                        Comment


                          #57
                          someone here brought up something i hadnt thought of he used to be a teacher maybe hes trying to make us think

                          Comment


                            #58
                            But yet he keeps posting threads for new products, doesn't show any hard evidence to support his products, bashes everyone for questioning his work, and on top of it all he always talks about questioning his own sanity. Shouldn’t he be thankful we care enough to want to know how his products can help improve our E30's?



                            A vender bashing everyone and questioning his own sanity in the process..It just seems like a loose, loose situation.

                            Comment


                              #59
                              Originally posted by Schneider325 View Post
                              But yet he keeps posting threads for new products, doesn't show any hard evidence to support his products, bashes everyone for questioning his work, and on top of it all he always talks about questioning his own sanity?

                              Shouldn’t he be thankful we care enough to want to know how his products can help improve our E30's?



                              A vender bashing everyone and questioning his own sanity in the process..It just seems like a loose, loose situation for everyone.
                              Ive met him and hes definitly a different kind of guy (no offence dan).

                              added:looking through i dont really see that hes bashing anyone tho

                              Comment


                                #60
                                Who he is in person, in front of his friends and wife is irrelevant.

                                To us, he is a vender on R3V. From what I've read so far on him, (I probably missed some points) he could very well be the most knowledgeable person here. Considering he is a vender on top of that, he needs to put his money where his mouth is and show us the data.

                                On a side note, how does your LCAB brace supposed to improve two of the strongest points on the E30 and more importantly, make a difference?

                                Comment

                                Working...
                                X