If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
225/50R15 R888R
Konig Dekagram 15x8 ET25
Needs a small spacer up front. May be desirable to have one in the rear, but I need to wind down the suspension to confirm. Ass had to be high with the old setup.
15x7 Tire Rack C1Ms. I believe they don't make the sliver ones in E30 fitment anymore.
The center caps come off a C3M (also from Tire Rack) and are meant for NA Miatas. In order to get the rear ones to fit, you'll need 5mm spacers in the back.
The roundels on the caps simply stick into place. Part number is 36131181082.
Just picked up my ‘91 318is this past weekend and am debating between 15 and 16 inch wheels!
Anybody got new pictures to add to this thread!?
Nice bump, I've got some good pics!
15" European Market Basketweave / Euroweave / Style 5
Bolt Pattern: 4x100
Width: 7"
Diameter: 15"
Offset: ET +24
Weight: 7.38kg
Not offered on any North American models. Available as special order from BMW.
Other Details:
Dunlop Direzza DZ102 (205/55r15) Tires
Early model (Higher rear arches)
H&R Sport Springs (w/ 1/4 inactive coil cut from front)
Bilstein Sport Dampers (w/ cut front internal bumpstops)
E90 Drop Hats (10-15mm drop in front)
318i Thinner Front Spring Pads (6mm drop)
Lemförder E30 M3 Offset Control Arm Bushings (Pushes front wheels forward in the arches)
First set of pictures (Silver painted car) is 5mm front wheel spacers, 20mm rear wheel spacers.
Second set of pictures (Brown painted car) is no spacers / stock euroweave offset.
Leave a comment: