Announcement

Collapse
No announcement yet.

good from far, but far from good

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by ThatOneEuroE30 View Post
    Hmm interesting I got Koni sport adjustable in all four corners with Gc coils 450/650 I wonder how it will ride. Then again I'm m30 swapped so I need a little bit stiffer ride.

    im sure yours will be a good setup. i got this car a little before winter and ive only driven this car for a month now with this setup.

    going from blown/cut stock springs to these is quite a dramatic change, maybe im just not used to a stiff ride yet. also every bushing in this car is poly, some of which the P.O installed when the swap was done. so thats going to add to stiffness/vibratons too.


    i have no idea what i am doing with my life

    Comment


      #32
      Originally posted by dirtbag30 View Post
      im sure yours will be a good setup. i got this car a little before winter and ive only driven this car for a month now with this setup.

      going from blown/cut stock springs to these is quite a dramatic change, maybe im just not used to a stiff ride yet. also every bushing in this car is poly, some of which the P.O installed when the swap was done. so thats going to add to stiffness/vibratons too.
      Lolol I did the same poly all the way.. same with gutted interior. My cars in bits all over the house though hahaha so it will be a while until i get to see how my suspension hold up.


      1989 325is l 1984 euro 320i l 1970 2002 Racecar
      1991 318i 4dr slick top


      Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
      Vintage race car revival (2002 content)
      Mtech 2 turbo restoration
      Brilliantrot slick top "build"

      Comment


        #33
        I did poly bushings in the rear, and it's really not bad, barely a noticeable difference, if any, honestly. I'll second what nando said, get some Konis in the rear, and your ride will probably improve. I've never had Konis, but based on what I've read, they offer a much better ride quality than the Bilsteins.

        Comment


          #34
          Does anyone do poly control arm bushings? I threw a set in for the hell of it. Was gonna go poly sway bar bushings but didn't have $$ so I got oem and some new end links


          1989 325is l 1984 euro 320i l 1970 2002 Racecar
          1991 318i 4dr slick top


          Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
          Vintage race car revival (2002 content)
          Mtech 2 turbo restoration
          Brilliantrot slick top "build"

          Comment


            #35
            my CAB's are AKG poly. like i said every bushing is poly.


            i have no idea what i am doing with my life

            Comment


              #36
              this build is good. i like this build.

              i am going to be filling my sunroof soon, i will make sure to post in my thread about it if you want ideas or anything

              1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
              IG: @mitchlikesbikes

              Comment


                #37
                Originally posted by mitchlikesbikes View Post
                this build is good. i like this build.

                i am going to be filling my sunroof soon, i will make sure to post in my thread about it if you want ideas or anything
                thanks.

                that might be helpful, ill keep an eye on your thread.


                i have no idea what i am doing with my life

                Comment


                  #38
                  im kindof at a loss to what i should even do with this car.

                  after the roof im finding more and more bondo on the car.

                  theres a pretty good patch in front of the passenger rear tire that looked funny up close so i took off the rear panel from inside the car, and you can tell that it was dented in and replaced and filled with this crap.

                  basically lost all hope on having a nice car when the chassis is so rough.

                  Click image for larger version

Name:	photo 5.jpg
Views:	1
Size:	115.2 KB
ID:	7168208

                  what would you do?


                  i have no idea what i am doing with my life

                  Comment


                    #39
                    Kill the PO.

                    FREE BITCOINS!! http://qoinpro.com/71690d1639966bfbf223bf16538cec21
                    Originally posted by scabzzzz
                    I stand up, pull my dick out, and asked my gf to give me some noggin... Well, she starts laughing at me and I freaked out and ran off and locked myself in a bedroom.
                    1989 325i - Project/weekend driver
                    2002 325i - DD
                    2005 Suzuki SV650 - Toy

                    Comment


                      #40
                      Sand the car down buy good quality bondo and fix it properly and get a respray. Don't wanna sound like a douche but idk why you even care it's a 20 some year old car it's gonna get dents. Unless it's a m3 no one is gonna care about it either. My car was the same way covered in bondo and shitty bondo work to.


                      1989 325is l 1984 euro 320i l 1970 2002 Racecar
                      1991 318i 4dr slick top


                      Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
                      Vintage race car revival (2002 content)
                      Mtech 2 turbo restoration
                      Brilliantrot slick top "build"

                      Comment


                        #41
                        Originally posted by gtdragon980 View Post
                        Kill the PO.
                        lol

                        Originally posted by ThatOneEuroE30 View Post
                        Sand the car down buy good quality bondo and fix it properly and get a respray. Don't wanna sound like a douche but idk why you even care it's a 20 some year old car it's gonna get dents. Unless it's a m3 no one is gonna care about it either. My car was the same way covered in bondo and shitty bondo work to.


                        no offense taken, i dont know why i care either, i see SO many clean e30s, and i just want one. haha

                        but in all reality im just going to hoon my car and not worry about it. if i think about it i got a free swapped car so i shouldn't be complaining too much.


                        i have no idea what i am doing with my life

                        Comment


                          #42
                          Originally posted by ThatOneEuroE30 View Post
                          Don't wanna sound like a douche but idk why you even care it's a 20 some year old car it's gonna get dents. Unless it's a m3 no one is gonna care about it either.
                          You sound like a douche. Not everyone shares your ridiculous sentiment that M3s are the only cars worth bringing back to their former glory.
                          Originally posted by kronus
                          would be in depending on tip slant and tube size

                          Comment


                            #43
                            Originally posted by agent View Post
                            You sound like a douche. Not everyone shares your ridiculous sentiment that M3s are the only cars worth bringing back to their former glory.

                            Bondo doesn't hurt any car it's really only the purist that care. Most people if it's done properly will never notice there's bondo on there car. And m3's aren't the only car to bring back. Seen my build thread makes that statement redundant. I was saying a pristine m3, or Shelby gt350 those are the types of cars you freak out about when it's covered in bondo.


                            1989 325is l 1984 euro 320i l 1970 2002 Racecar
                            1991 318i 4dr slick top


                            Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
                            Vintage race car revival (2002 content)
                            Mtech 2 turbo restoration
                            Brilliantrot slick top "build"

                            Comment


                              #44
                              i would much rather have dents vs. bondo.

                              In this case the po filled in a dent with body filler. its pointless.
                              Even if it is done perfect its still ugly like a girl with makeup.


                              i have no idea what i am doing with my life

                              Comment


                                #45
                                Idk to each his own. Bondo doesn't bother me one bit. It's pointless though to put bondo on panels that can easily be replaced. That's just being cheap IMO.


                                1989 325is l 1984 euro 320i l 1970 2002 Racecar
                                1991 318i 4dr slick top


                                Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
                                Vintage race car revival (2002 content)
                                Mtech 2 turbo restoration
                                Brilliantrot slick top "build"

                                Comment

                                Working...
                                X