Did you plug the wires into the correct hole on the rotor cap?
-
1997 Artic Silver M3
CES GT4094r 651hp/615tq @ 24 psi -
yes i switched wires next to eachother. il will double check this. but i had a missfire then replaced that cap and its the same.
8)8)Comment
-
I'm kind of confused when you say you switched wires next to each other....the cap has a number by each of the tubes that MUST go to the corresponding spark plug/cylinder hole1997 Artic Silver M3
CES GT4094r 651hp/615tq @ 24 psiComment
-
ahh did not know that... learn something new. and well i put them next to eachther both the way they are mounted. so i took top to top middle to middle and so on. im sure they are the way they go but checking now8)8)Comment
-
Well,that is definitely the problem....flash a light on the cap and you will see the numbers 1-6 and then the spot for the coil plug itself!1997 Artic Silver M3
CES GT4094r 651hp/615tq @ 24 psiComment
-
just checked them. and i had them right so the issue isnt coming from that. waiting for it to cool down imma started see if cold does anything8)8)Comment
-
car was cold and some working.
checking grounds now maybe some came loose8)8)Comment
-
Did you replace the rotor as well, or just the cap?1997 Artic Silver M3
CES GT4094r 651hp/615tq @ 24 psiComment
-
just the cap... but problem has been found. thank you for the help learned some new out of it lol...
does anyone sell some more stronger rocker arms? this is my third one broken i fell like they break too much..
and do i have to pull the head off the car? or is there a way i can do this with the head in the car8)8)Comment
-
8)8)Comment
-
I use Ireland engineerings HD rocker arms in my track e30 and my daily e30 great product, great price. I will never use standard Rocker arms again.
329iComment
-
purchasing these. and pulling the head. is this the only way of doing tis? no way they can be done in the car?8)8)Comment
-
and the head is half way out now. just got one nut left on the headers, and intake manifold nuts and it should be out tomorrow8)8)Comment
-
rocker arm fixed. drove the car and its 100% i replaced it with head in the car. was very simple to do """""IF YOU KNOW WHAT YOUR DOING""" so i fixed it all in under 3 hours. but then i had the oil return blow a seal..... so now on to dropping the oil pan8)8)Comment
-
reason why i did it this way right now. i order the hd rockers... and wanted to drive the car to do some more stuff to it that requires me to drive back and forth to the shop... ill be taking head off and doing all arms again with hd ones and fix few other things then8)8)Comment
Comment