Took two orders before I ended up with the correct door harness, but once I did it was game on! Took everything apart and was ready.

Here’s a glimpse of the madness I was staring at

More shenanigans on the inside

The wiring overall went well, and my windows are working again. I’ve also had an airbag light on from the door wiring, but hats still on and I think I need a proper VW diagnostic tool to reset that light, not sure this is one the VCDS can reset, if it can please let me know.
I also wanted to tackle upgrading the speakers mostly because driver side front didn’t work, and one of the rears is blown out, so this seemed like a good opportunity to upgrade the front.
Unfortunately the speakers aren’t exact the quoted sizes.
The 6 3/4” and 4” sizes each had their own challenges. Let’s start with the woofer:
First problem is that it’s riveted in. Drilled those out and noticed the second problem.

Ummmm

I think I need to use the stock speaker housing as a base to mount these to…

The 4” speaker install wasn’t terrible, the holes were slightly larger than what was on the speaker, which wasn’t too bad. Both were mounted solid, 3 on one side and 4 on the other.

I was hopeful to at least make these work, but the connector had 3 wires versus the normal two, so I left those alone and just buttoned it back up, with less functional speakers than what I started with










Leave a comment: