Finishing up the Wastegate plumbing for the tru boost setup and positioning of the downpipe and Wastegate outputs.
Announcement
Collapse
No announcement yet.
Finally back into an e30: ‘88 Alpine on Blue 325ic cruiser build
Collapse
X
-
It’s alive!!! Started today and man did it sound good with no exhaust on it. The JB weld seems to be working also. Will be finishing up the Wastegate stuff then will put the downpipe back on. Need to get gauges sent to power and hooked into the ECU. Will route the charcoal canister under the car and need to figure out the valve cover vent. Figure out a catch can setup.
I uploaded a video of it on Instagram at Klassische30vert if ya wanna check it out.
Leave a comment:
-
Have the tune loaded and other items set. JB weld setting overnight. Will work on Wastegate tomorrow and try to start!!
Leave a comment:
-
-
Did find one issue. Oil return bung has a leak. Guy that welded it is well know in the Jeep community and thinks he took it a bit hot. He repaired it but doesn’t look like it’s holding. Going to clean it up and try to seal it with JB Weld. If that doesn’t work, I’ll drop it so he can repair- trying to avoid!
Leave a comment:
-
-
-
Originally posted by zwill23 View Posthah! My vacuum distribution block just came in the mail yesterday! Such a cool piece.
Here I thought I was the only one aware stim tech existed , they have a lot of really innovative projects going on for the E30 platform.
Leave a comment:
-
Originally posted by dmanb2b View PostLooks great...can I ask what air filter you are running?
- Likes 1
Leave a comment:
-
hah! My vacuum distribution block just came in the mail yesterday! Such a cool piece.
Here I thought I was the only one aware stim tech existed , they have a lot of really innovative projects going on for the E30 platform.Last edited by zwill23; 01-08-2020, 04:07 PM.
- Likes 1
Leave a comment:
Leave a comment: