my own personal hell

[Bin_jammin]

$50 bucks for leaving a DQ treat as a new hood ornament.

[straight6pwr]

some of my favorite highlights for new viewers:

In the process of this build I will probably use an angle grinder and shave some weight off of crank, harmonic balancer and flywheel.

In the psycho build i will...

all for the low low price of $500.

yesterday sucked so much balls that pornstars jenna jameson and briana banks called me up and said damn your day sucked a LOT OF BALLS.

and frankly the dyno never lies but math can decieve you.

i shall hunt the resistor.

[HarryPotter]

some of my favorite highlights for new viewers:

Nice cliffs, pretty much sums up the op's complete lack of basic thought processes.

[whatt18yahoo]

anyone have a lathe i can borrow? my godfather decided to bail on me. i pretty much finished the mti i just got to cut a few o-ring grooves on the vacume log. and the big project is making a fuel rail adaptor. i have a -6an fitting and need it to plug into the factory port for the fuel rail. i will post pics if anyone wants to see but it's not that impressive just some brass and some hose plumbing for the vaccume. i wanted to get the plenum done this weekend but that didn't happen, but i mught have some time tomorrow to at least get started.

[structured]

anyone have a lathe i can borrow? my godfather decided to bail on me. i pretty much finished the mti i just got to cut a few o-ring grooves on the vacume log. and the big project is making a fuel rail adaptor. i have a -6an fitting and need it to plug into the factory port for the fuel rail. i will post pics if anyone wants to see but it's not that impressive just some brass and some hose plumbing for the vaccume. i wanted to get the plenum done this weekend but that didn't happen, but i mught have some time tomorrow to at least get started.

LOL! First your friend, now your godfather!! Fucking rich!

Take the hint dude. Give up.

[JTapper]

anyone have a lathe i can borrow? my godfather decided to bail on me. i pretty much finished the mti i just got to cut a few o-ring grooves on the vacume log. and the big project is making a fuel rail adaptor. i have a -6an fitting and need it to plug into the factory port for the fuel rail. i will post pics if anyone wants to see but it's not that impressive just some brass and some hose plumbing for the vaccume. i wanted to get the plenum done this weekend but that didn't happen, but i mught have some time tomorrow to at least get started.

Spelling > You

[Bishop]

Why did he bail? lol

[whatt18yahoo]

Why did he bail? lol

between his 65 corvette restoration, his house remodelling, and various friends, his brother and neices, and neighbor asking for help for emergency projects he felt it unnecessary to help me with my project as i have a running car and my modifications are not an essential item. i understand why he bailed but am unhappy about it.

LOL! First your friend, now your godfather!! Fucking rich!



Take the hint dude. Give up.

never make assumptions until you are given the full facts btw travis is still helping with the turbo, theres just nothing to do at the moment that he can be a part of. though he'll probably end up welding the plenum together when i get to that

[HarryPotter]

and the saga continues...

[Wh33lhop]

Yeah dude, good luck on that vackume log, or whatever. DON'T BE LISTENING TO DEM HAYTERS Y0!!!11

[Bin_jammin]

Priceless. Absolutely priceless.

[NC325iC]

yeah you can borrow my lathe, just return it when youre done.

[Bimmerman325i]

Good job deleting your posts in the S38 thread, though I have them all quoted. FAIL

[nando]

Good job deleting your posts in the S38 thread, though I have them all quoted. FAIL

he didn't delete them.. ;)

[Bimmerman325i]

he didn't delete them.. ;)

hahahahahaaaa then thanks for keeping his idiocy in one thread!