my bone stock looking 318is

[z31maniac]

Stop with this poppycock and go make us a vid.

[Jean]

shouldnt you be making sure nobody parks in the passenger drop off zone??
Im going to set your code reader on my turbo manifold while Im testing

[ZM Blue Devil]

vid?

[blunttech]

vid?

this will have to tide you over till I get on the dyno

[ZM Blue Devil]

weak dude, everyone has already seen that version of you.

[blunttech]

weak dude, everyone has already seen that version of you.

dont you have a muffler you should be packing up?

[ZM Blue Devil]

dont you have a muffler you should be packing up?

its ready just need an address...

[parkerbink]

I tried calling a few places today. I dont understand how business's stay in business. On hold for 10 minutes at one place. No answer and no call back at another. It wont be long. Maybe this weekend??

In March when I was looking to build the Acura motor I contacted more than 20 shops, no response from 85% and no followup from the rest!

What shitty economy?

[blunttech]

In March when I was looking to build the Acura motor I contacted more than 20 shops no response from 85% and no followup from the rest!

What shitty economy?

took me 3 times to get in and I had to wait 9 days for dyno time? wtf? only saving grace is once i actually spoke to someone on the phone he was very helpful and interested in the car.So that makes a guy feel a little better.

[parkerbink]

took me 3 times to get in and I had to wait 9 days for dyno time? wtf? only saving grace is once i actually spoke to someone on the phone he was very helpful and interested in the car.So that makes a guy feel a little better.

That's great!

[blunttech]

dyno delayed unfortunately. I was having some weird rich symptoms so after explaining it to Matt at TRM he taught me how to pressure check the intake system with some home depot supplies. I whipped that up this afternoon and found a couple small leaks right away. So he's sending me a couple pieces to fix it tomorrow. Everyone is at SEMA this week so the DYNO is wide open. I hope to get on it late in the week.
Heres my home depot set up. I ran 20psi into it

[Jean]

high tech!

[TrentW]

Potato launcher!

[markseven]

dyno delayed unfortunately. I was having some weird rich symptoms so after explaining it to Matt at TRM he taught me how to pressure check the intake system with some home depot supplies. I whipped that up this afternoon and found a couple small leaks right away. So he's sending me a couple pieces to fix it tomorrow. Everyone is at SEMA this week so the DYNO is wide open. I hope to get on it late in the week.
Heres my home depot set up. I ran 20psi into it

Is that the biggest filter that will fit the available space?

[blunttech]

Is that the biggest filter that will fit the available space?

not really I currently have it mounted directly to the turbo. But once I get a 4" chunk of pipe Ill direct it downward with the 45 degree silicone coupler. I think it could be 3-4 inches longer. I just found this filter and grabbed it