If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
2011-2012 Project: Get an S54 running in an E30 using a stock MSS54 DME
what did you use to connect the E30 expansion tank? I assume you used the late model version?
I use the original bottle off the car, It was a 325e, I dont know if the bottles are different, but I do know the old 735's, and 635's have the same bottles. I presume thats what you mean?
If you're asking about the pipe, I used the e46 original ends and had them joined to a pipe the correct size and jubilee clipped to over flow.
Whoa, thanks for reminding me. I need to get in the garage! And thanks for the info, Turk, about the reflashes. I got mine done by a guy in Germany, but it's good to know there's an alternative!
I used a Z3M expansion tank hose, which allows for easy connection to the E30 late model expansion tank.
Originally posted by whysimon
WTF is hello Kitty (I'm 28 with no kids and I don't have cable)
Whoa, thanks for reminding me. I need to get in the garage! And thanks for the info, Turk, about the reflashes. I got mine done by a guy in Germany, but it's good to know there's an alternative!
I used a Z3M expansion tank hose, which allows for easy connection to the E30 late model expansion tank.
that's what I was looking for, thanks.
BTW, how much did the E46 M3 FP cost you? used I assume? too bad you can't get just the pump, without the E46 carrier.
Comment