Kamotors E30-Turbo to ITB M20

[kamotors]

SO still working out the bugs with my tune running on the 60lb injectors Whodwho is giving me tunes from my datalogs and helping me get this thing dialed in. Cant even express how happy I am with the tuning help Whodwho is providing me on a daily basis.

Go buy a MS from whodwho, you car will be awesome and you wont regret it!

[Zacm829]

SO still working out the bugs with my tune running on the 60lb injectors Whodwho is giving me tunes from my datalogs and helping me get this thing dialed in. Cant even express how happy I am with the tuning help Whodwho is providing me on a daily basis.

Go buy a MS from whodwho, you car will be awesome and you wont regret it!

I was very impressed with his service as well! Great product.

Your injectors will be fine without clips since the rail is bolted down, mine have been like that for a while.

[Mr. Tasty]

Your injectors will be fine without clips since the rail is bolted down, mine have been like that for a while.

yep this. 3 of mine aren't clipped in.

[kamotors]

yeah its been fine I've done a bunch of driving to get my data logs and haven't had any issues with the install. Also my car runs real pooey below 3krpms at light load with the new 60bers. It ran perfect with the 30lb ones but cant seem to get these dialed in, can anyone share their injector setting who is running a similar setup? My overrun fuel cut is off but I'm still seeing 22.4AFR down hills so I m not sure whats wrong.

[e30nub]

Makes me miss my Rieger. Great work; keep it up!

[kamotors]

got most issues sorted and nice clean AFR's. Went back up to 12psi with megasquirt should be at 1bar and head studded by this weekend.

[TheTacoMan]

[E30_Pare]

Did u lay that carbon yourself?

[kamotors]

Yup just getting into carbon fiber fabrication this summer also made a stupid little pick . Just experimenting with easy things first than I'll do things like CF air boxes, doorhandles, valve cover covers and anything else I feel like making.

[E30_Pare]

Cool beans. I want to try something like that. I'll prob start smaller with fiberglass.

[sayed ali]

Megasquirt power :)

[kamotors]

I Have a weird surging idle now and not sure why. My valve cover was leaking after i did my head studs so I figured it was that but I replaced the gasket and it still surges and after a long drive it seems to still leak even after benign torqued multiple times..

[MR 325]

Did you do the studs without pulling the head? You're crazy!

I think I need to turn up my boost, thinking of going from 9 to 12.

[kamotors]

Did you do the studs without pulling the head? You're crazy!

I think I need to turn up my boost, thinking of going from 9 to 12.

you will love 12psi! it feels worlds better than 9 does.

[Sagaris]

Do you miss the NA character of the engine at all?