Kamotors E30-Turbo to ITB M20

[pandaboo911]

Sweeeet, I'm doing an m30 turbo as well, but using all the m106 bottom mount stuff

[kamotors]

Just need 5mm less spacer in the rear and it'll be ready to roll out.(studs not long enough for the 20mm spacer)

Sent from my SM-N920T using Tapatalk

[Pootis]

What lugs ended up working?

[kamotors]

What lugs ended up working?

These with inverted torx style. Any thing longer would hit center cap, had to change all studs as well as mine were long enough to stop the tool from fitting in the lug nut itself before it got tight.

Sent from my SM-N920T using Tapatalk

[kalib0y]

These with inverted torx style. Any thing longer would hit center cap, had to change all studs as well as mine were long enough to stop the tool from fitting in the lug nut itself before it got tight.

Sent from my SM-N920T using Tapatalk

if you wanted to keep the longer studs, we have a small diameter nut that would work in those wheels so the stud can protrude through

[kamotors]

if you wanted to keep the longer studs, we have a small diameter nut that would work in those wheels so the stud can protrude through

The center cap didnt fit with the long motorsport hardware studs I had. They were like 75mm I believe, the new studs I grabbed from summit are about 60mm. A 65mm stud would be like perfect but couldn't get those local. I'll be putting the motorsport hardware studs on my m3 likely.

Sent from my SM-N920T using Tapatalk

[kalib0y]

The center cap didnt fit with the long motorsport hardware studs I had. They were like 75mm I believe, the new studs I grabbed from summit are about 60mm. A 65mm stud would be like perfect but couldn't get those local. I'll be putting the motorsport hardware studs on my m3 likely.

Sent from my SM-N920T using Tapatalk

THanks for the info, How much room is there under the cap? Are you using a spacer? If so, what size?

[kamotors]

THanks for the info, How much room is there under the cap? Are you using a spacer? If so, what size?

The wheel is offset 30, and I'm running a 15mm spacer. There is very little room under the cap, maybe a 1/4" now but possibly less. With 75mm studs the tip of each stud hit the center cap.

Sent from my SM-N920T using Tapatalk

[kalib0y]

interesting. Ill look into making longer Non-bullet nose studs :)

[Pootis]

Thanks for the info I need a find a set like that for wheel bolts I have filled and redrilled wheels and the lug holes are tiny

[TroyShark]

Any side shots with the new wheels?

[kamotors]

Any side shots with the new wheels?

soon^
Ready to race this weekend. Just a few more things i'd like to change before bimmerfest.
edit2 by kamotors@y, on Flickr
edit1 by kamotors@y, on Flickr

[kamotors]

side shot
sideedit by kamotors@y, on Flickr

[TroyShark]

Looks good I assume you are running some spacers?

[kamotors]

Looks good I assume you are running some spacers?

15mm, autox videos soon, the alpina suffered some damage today though:(


Sent from my SM-N920T using Tapatalk