14 years - 1991 325ix, Stroker/5-Speed (N52 swap?)

[nando]

There could be more, i have the GC camber plates maxed out for minimum camber on the street.

These pics are super compressed over the originals :(

Here's the full res of the last one:

http://www.325ix.com/pics/2013/10-18-2013/CAM01053.jpg

This phone has a better camera than my last actual camera, lol.

[F34R]

Wished I was a local to you, I want to shoot that car badly. It is perfection and the management is what the m20 should have been.

So many m20 builds on here. IMO this is in the top 5 out there.

[nando]

Probably better that you dont, its not even close to perfect! There are some bad paint spots on the roof, and even a new rust spot under the windshield that is KILLING me to get fixed. And my front seats are horrid, lol... notice there are never interior shots :p

[rzerob]

subscribed

[bradnic]

It is perfection and the management is what the m20 should have been.
So many m20 builds on here. IMO this is in the top 5 out there.

so much learning for us all here - the great suspension work, the stroker... never seen an ix stanced like that, WITH full suspension travel and decent camber.

[franco90]

wow nice IX

[nando]

I'll just leave this here..

[bradnic]

That's friggin awesome..
What's the test rig?

[nando]

the stim's are megasquirt stuff. the harness is my "reverse" wiring adapter for MSS54 to my MS3/M20 harness.

the main hurdle now is getting it to work with just 1 TPS input..

[bradnic]

I can get 300whp going another route with a different motor for basically the same cost..

S54 in an IX? Update? Going through Nando withdrawal here.

[nando]

I can neither confirm or deny your allegations.

no real updates. Started taking apart an old transfercase to rebuild it, waiting for a transmission to arrive from Germany and looking for an ix 5-speed trans as a core. also need to get the front and rear diffs down to California to be rebuilt.. get the M20 running on MSS54, finish the cluster swap, man it never ends!

[bradnic]

What no 535ix bits? Damn.

[DER E30]

I can neither confirm or deny your allegations.

no real updates. Started taking apart an old transfercase to rebuild it, waiting for a transmission to arrive from Germany and looking for an ix 5-speed trans as a core. also need to get the front and rear diffs down to California to be rebuilt.. get the M20 running on MSS54, finish the cluster swap, man it never ends!

S54iX look out!

[nando]

almost done with this mini project. :)

[henryki]

Oooooo dat looks Noice