e30 Turbo from BAHRAIN

[sayed ali]

Is your turbo the same as this one?

T70 Turbocharger
Condition - Brand New!
Manufacturer - JDM Sport
Application
Ideal for large (3.0L-6.0L) displacement engines
Features
Stage 4 turbo capable of 300-500 HP
Capable of 25-35 PSI output at peak power performance
Wet float bearing
External wastegate
Compressor
Inlet = 4"
Intake (ID / OD) = 2" / 2.5"
Inducer = 56.2 MM
Exducer = 72.9 MM
Trim = 59
A/R = 0.70
Turbine
Outlet = 2.5"
Turbo flange = T3 [twin entry divided flange]
Downpipe flange = 2.5" V-band
Inducer = 73.9 MM
Exducer = 58.3 MM
Trim = 62
A/R = 0.84
Center Section
Oil cool system
Oil feed = T3
Oil return = T3

It's very similar to mine except this: A/R = 0.84 , Mine is 0.63

[sayed ali]

Bored = New goodies ... :)

[sayed ali]

Some interior shots ...





Black painted boost gauge



Carbon fiber close shot :)

[bernzpeed]

Before ...



After :)





Which is better :P



should've used the actual 2 buttons trim instead of individuals like that.

[sayed ali]

New engine bay update & new fitting in the turbo housing instead of in the piping





After..




New goodies... MSD

[squidmaster]

nice stuff! any videos?

[el bimmer]

Wow this is a bad ass project!

[sayed ali]

Long time didn't post on here, updates:

- Currently I'm working on the suspension
- Next step is the tuning

Some recent engine bay shots ..

[sayed ali]

Update:

*New oil catch can tank
*finished the IC piping work
*New set of plugs + oil (for the dyno time)
*Installed the HKS FCD

Making sure that everything is fine before take it to the dyno by the end of November, as I have another liabilities now, and I'm waiting for the good weather :)

I hope I hit 350whp on something around 1 - 1.2 Bar

[jaywood]

Looks great...I like the heat shield...what's that all about? Cut up stove pot? :p

[sayed ali]

Updates:

*Got the oil catch installed
*Converted the stock plugs wires to be usable with the closed end plugs like:



-As of it's very difficult to find the open ended ones over here..

I took out the plastic from the stock wires that goes to the plugs, cut it, fitted that piece on it







*Bought new set of NGK iridium plugs
*MSD 6a
*MSD coil blaster 2



Checking around leaks, set the boost, etc.. before the tuning in the end of this month hopefully ..

[sayed ali]

Update:

Cleaned my BBs & Painted them (Gold)

Before:



In progress...



After:



Side view..

[sayed ali]

Received my BBs caps just now

[FLG]

Looking good!

btw with the plugs, all you need to do is unscrew the ends (most plugs are designed this way) i cant think of a single plug here that comes with no caps on the end off hand, we just grab a pair of pliers and unscrew em, some are non removable though.

[sayed ali]

Most of them over here are irremovable,, that's why I did this way