Announcement

Collapse
No announcement yet.

e30 Turbo from BAHRAIN

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Originally posted by downforce22 View Post
    Is your turbo the same as this one?

    T70 Turbocharger
    Condition - Brand New!
    Manufacturer - JDM Sport
    Application
    Ideal for large (3.0L-6.0L) displacement engines
    Features
    Stage 4 turbo capable of 300-500 HP
    Capable of 25-35 PSI output at peak power performance
    Wet float bearing
    External wastegate
    Compressor
    Inlet = 4"
    Intake (ID / OD) = 2" / 2.5"
    Inducer = 56.2 MM
    Exducer = 72.9 MM
    Trim = 59
    A/R = 0.70
    Turbine
    Outlet = 2.5"
    Turbo flange = T3 [twin entry divided flange]
    Downpipe flange = 2.5" V-band
    Inducer = 73.9 MM
    Exducer = 58.3 MM
    Trim = 62
    A/R = 0.84
    Center Section
    Oil cool system
    Oil feed = T3
    Oil return = T3
    It's very similar to mine except this: A/R = 0.84 , Mine is 0.63


    M20B28 Turbo

    My Build Thread

    http://www.r3vlimited.com/board/showthread.php?t=255839

    Comment


      #47
      Bored = New goodies ... :)









      M20B28 Turbo

      My Build Thread

      http://www.r3vlimited.com/board/showthread.php?t=255839

      Comment


        #48
        Some interior shots ...





        Black painted boost gauge



        Carbon fiber close shot :)



        M20B28 Turbo

        My Build Thread

        http://www.r3vlimited.com/board/showthread.php?t=255839

        Comment


          #49
          Before ...



          After :)





          Which is better :P



          should've used the actual 2 buttons trim instead of individuals like that.
          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
          ---------------------------------
          89 E30 S52
          ---------------------------------
          Transaction Feedback.

          Comment


            #50
            New engine bay update & new fitting in the turbo housing instead of in the piping





            After..




            New goodies... MSD







            M20B28 Turbo

            My Build Thread

            http://www.r3vlimited.com/board/showthread.php?t=255839

            Comment


              #51
              nice stuff! any videos?

              Comment


                #52
                Wow this is a bad ass project!
                sigpic

                Comment


                  #53
                  Long time didn't post on here, updates:

                  - Currently I'm working on the suspension
                  - Next step is the tuning

                  Some recent engine bay shots ..





                  M20B28 Turbo

                  My Build Thread

                  http://www.r3vlimited.com/board/showthread.php?t=255839

                  Comment


                    #54
                    Update:

                    *New oil catch can tank
                    *finished the IC piping work
                    *New set of plugs + oil (for the dyno time)
                    *Installed the HKS FCD

                    Making sure that everything is fine before take it to the dyno by the end of November, as I have another liabilities now, and I'm waiting for the good weather :)

                    I hope I hit 350whp on something around 1 - 1.2 Bar


                    M20B28 Turbo

                    My Build Thread

                    http://www.r3vlimited.com/board/showthread.php?t=255839

                    Comment


                      #55
                      Looks great...I like the heat shield...what's that all about? Cut up stove pot? :p

                      Comment


                        #56
                        Updates:

                        *Got the oil catch installed
                        *Converted the stock plugs wires to be usable with the closed end plugs like:



                        -As of it's very difficult to find the open ended ones over here..

                        I took out the plastic from the stock wires that goes to the plugs, cut it, fitted that piece on it







                        *Bought new set of NGK iridium plugs
                        *MSD 6a
                        *MSD coil blaster 2



                        Checking around leaks, set the boost, etc.. before the tuning in the end of this month hopefully ..


                        M20B28 Turbo

                        My Build Thread

                        http://www.r3vlimited.com/board/showthread.php?t=255839

                        Comment


                          #57
                          Update:

                          Cleaned my BBs & Painted them (Gold)

                          Before:



                          In progress...



                          After:



                          Side view..



                          M20B28 Turbo

                          My Build Thread

                          http://www.r3vlimited.com/board/showthread.php?t=255839

                          Comment


                            #58
                            Received my BBs caps just now





                            M20B28 Turbo

                            My Build Thread

                            http://www.r3vlimited.com/board/showthread.php?t=255839

                            Comment


                              #59
                              Looking good!

                              btw with the plugs, all you need to do is unscrew the ends (most plugs are designed this way) i cant think of a single plug here that comes with no caps on the end off hand, we just grab a pair of pliers and unscrew em, some are non removable though.
                              -Build http://www.r3vlimited.com/board/showthread.php?t=295277

                              Comment


                                #60
                                Most of them over here are irremovable,, that's why I did this way


                                M20B28 Turbo

                                My Build Thread

                                http://www.r3vlimited.com/board/showthread.php?t=255839

                                Comment

                                Working...
                                X