So very pretty. Are those the factory Recaro option seats?
I had no idea those existed. I take it they're not exactly common items. All I know is I need one!
Touring M52B28 (another one from Ireland)
Collapse
X
-
Another part finished and ready to go onto the car.
I cleaned up the brake master cylinder ages ago with a wire wheel and wire brush and then left it soaking in Deox-C poweder to de-rust it.
The original servo is massive and doesn't fit any longer with the m52, fouls in the intake manifold, so a Clio one was used. The rod inside needed to be removed and after figuring out it wasn't metric but actually 1/4" UNF I got a threaded rod and cut it down so it was just about level with the face of the serve (same as on the original servo).
Original

Clio

The Clevis pin hole also needed filing out a little to accommodate the E30 pin


Dificult to see but I used a threaded round bar/slieve on the rod to stop it moving and it's also nice and snug inside the end of the MS

Leave a comment:
-
Myself and Feens went for a look at the touring today. I can;t say anything other than that I'm very very happy with it! The colour is spot on and I really like it. The finish is also great, it's a little dusty in the pics and hasn't been flattened and polished yet in the pics but you get the idea:







Nearly time for it to come home :D :dance:Leave a comment:
-
Hehe, if only it would still look as good after a year of use!
I think this might be a bit darker or blue-er, we'll see as I'm sure I'll bump into Avus at some point somewhere.Leave a comment:
-
Ha! It almost looks like Avus Blue in the booth, but direct sunlight will be the test.Leave a comment:
-
-
Forgot to mention I dyed the interior a second time last week.
Left dyed once, right twice

Not dyed vs dyed
Leave a comment:













Leave a comment: