Announcement

Collapse
No announcement yet.

Cirrus Saloon

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Lambos saloon kills me tho


    I want to have a cleaner look less metal showing..

    time will tell

    Comment


      #62
      Burning the late night oil. Rolled all four of my arches.

      Really want to watch Mad Max but it's late.

      Comment


        #63


        Lof8's inspirational machine.

        F-yea mad max, plz not thunderdome.

        Comment


          #64
          Originally posted by Lodsin View Post


          Lof8's inspirational machine.

          F-yea mad max, plz not thunderdome.

          only MAD MAX .....


          well I have postponed the plastic bumpers...again...
          FOR this..



          and I finished the Style 5's ive been polishing and now have a S2.93 diff......

          Comment


            #65
            Go put your diff in while it is still wet outside!!
            1989 325i 5Lug S52 - RIP 1991 325i S52

            Comment


              #66

              Comment


                #67
                Recaro repair class 101


                fist you take the old ripped under webbing/meshing from the seat ..


                then you make new straps carefully measuring so you don't have to cut them apart and re make them.


                then you reinstall in the seat.



                stay tooned for the next installment .. "INSTALLING THEM INTO THE CAR"

                Comment


                  #68





                  full rainy day shoot with the good camera.

                  I installed the passengers recaro last night need to adjust the brackets. the front is a little low..

                  Comment


                    #69
                    We'll for no good reason I'm removing my power steering.


                    Pulled my rack banjo bolts and fill welded the holes!!


                    I know both sides of the blocking off the rack vs. having it looped. I've done this for years with VWs and read many spec e30 boards doing it. I could have bought/ made a loop but don't really need to. Done

                    Comment


                      #70
                      Finished up the power steering delete. Pulled the pump, res and lines.

                      I can't wait to clean up all the wiring and junk on this side of the motor.

                      Found a ugly ground wire that need to be replaced.

                      Comment


                        #71
                        Don't sell the turbo stuff. You need boost over bumpers lol

                        Comment


                          #72
                          not for bumpers.... I just picked up a m54.....

                          how did you know I was selling it? azbmw?

                          Comment


                            #73
                            Originally posted by ikonwun View Post
                            not for bumpers.... I just picked up a m54.....

                            how did you know I was selling it? azbmw?
                            Daily search on craigslist for e30 stuff. the app on my phone shows me different cities. So Phoenix is on it in case theres a good buy Im only a few hours away, same with LA and Salt Lake.

                            Comment


                              #74
                              Sorry buy the turbo is sold.. But still have manifold if I want to boost .

                              But that been said I now own a m54 3.0l with ZHP cams.

                              I'm on the ropes if I want to start getting all the parts to swap it in a year or just sell it.



                              New KYB rear shocks for now. Replacing BLOWN out stockers... Super easy job 30mins

                              Raised it about 25mm will take out my spring pads again to get some of the low back.

                              I will be ordering a diffcover and fluid going to swap out the diff this weekend.

                              Comment


                                #75
                                Motor is home!!






                                X mas came early.

                                Picking up motor mount arms tomorrow. And harness next week.

                                Comment

                                Working...
                                X