New to the family, but NEED HELP!

[JeLani]

Take one whole day and do every cheap solution to make an e30 run smooth ie plugs wires , check vacuum lines , pump , injectors .. I'd test the battery too

[e30strokr]

copper sparkplugs, and general cleaning of throttle body DO NOT USE SEAFOAM if youre not going to change the oil!!! it becomes fluid like water even if you just run thru the intake.... like everyone said basic belt and waterpump..if youre mechanically inclined... and goodluck

[McGyver]

If you can't afford to replace you, you could at least pull the upper timing cover off and just look at it. If it's shredding due to a bad tensioner, stop driving it asap. If it's cracked to hell, stop driving it. If it has no cracks or little tiny cracks, you'll probably be ok.

This is the best advice if you don't want to do the job yourself. But seriously, a timing belt kits is $42.66 (https://www.blunttech.com/products/976921) and a water pump is $56.37 (https://www.blunttech.com/products/43945). So for less than $100 you know you'll be fine.

There are plenty of guys in ATL that can help you do this job, and it can be done in less than 2 hours if you have all the tools/parts ahead of time (and nothing breaks). I would post something in the regional section and offer to buy them dinner and beer for their time if you're really broke, or some cash if you have it. Then you make friends and learn how to be self sufficient with your car.

[itsonlygeorge]

The parts to do the timing belt cost about $120. The cost to rebuild the engine are well over $1000. I am sure that you can buy the parts for the timing belt (water pump, an extra gasket, tensioner, spring/pin, and the belt) from Blunttech and ask someone here to help you with the actual wrenching.

It takes 3.5 - 4 hrs from start to finish if you know what you are doing, and if you were near me I'd do it for some pizza and beer. I am also sure that there is someone near where you are on this forum that would probably do the same to help you out!

Also, if money is really an issue, DO THE TIMING BELT/WATER PUMP FIRST! Plugs, rotor, and cap cane be done later. The engine will run with shitty plugs for an 8 hr trip and be fine. It will not run once the timing belt snaps.

[nando]

if you break the motor because the 8 year old belt snaps, are you going to be able to afford to rebuild the head?

[stonea]

I wouldn't drive that thing with that timing belt. It would probably be cheaper to ship the car to FL than if the timing belt broke on the way down.

[Jdub]

bosch or ngk are the plugs i would go with. be sure to replace the cap, rotor and wires too.

orlando is a hell of a lot further from denver than 8 hrs.

Are there any particular brand names for the cap, rotor, or wires that are best? Ive heard too many times that the issues can be crappy parts.

Thanks Kershaw, Im going to go do that now! Hopefully getting to the point where I can inspect the timing belt doesn't require taking a ton of other stuff off too?

[Kershaw]

An ex gf's e30 snapped the belt accelerating from a stop light. I guarantee you she wasn't the type to get hard on the gas either.

If you can't afford to replace you, you could at least pull the upper timing cover off and just look at it. If it's shredding due to a bad tensioner, stop driving it asap. If it's cracked to hell, stop driving it. If it has no cracks or little tiny cracks, you'll probably be ok.

[Jdub]

8 years.. sheesh. that's a ticking time bomb, man. I wouldn't drive anywhere without replacing it first, except maybe straight to a shop to have it replaced.

It makes me really nervous man, I put pretty much every last penny into it to buy it, and I don't have the money to get it fixed until June 9th when I get my first paycheck. If you were me would you leave it back in GA until I get the timing belt done and then have my dad drive it down to me? Or you think as long as I'm gentle with it I can make it the 8 hour drive and then get it worked on down there?

I know you didn't mean to sound like an asshole man lol, I appreciate it.

[Reub_e30]

Lol, Im currently in Atlanta, Im going to be in Orlando for the summer.

And the timing belt was done 40k miles ago/8 years ago (this is the first thing I plan on doing once in Orlando)

Could timing belt be the issue?

Also, since Im learning from scratch, how would I learn how to do easy DIY stuff like that? I need to learn what the rotor and the cap and very simple stuff like that actually is.. I know, I know nothing but I gotta start somewhere.

Basically if you have a question about the car search it on Google. It will provide you with tons of link from this forum and others all related to what you want to know. And if you can't find the info make a thread in this forum. This method has helped me alot since I bought my e30 a few months ago. 1 thing I learned: expect to spend some money on maintenance at the beginning, after that just have fun. I'm still in the maintenance part of my build lol

Really not trying to be a dick about the "Google search" comment. It really does work if you use the right words or questions

[nando]

8 years.. sheesh. that's a ticking time bomb, man. I wouldn't drive anywhere without replacing it first, except maybe straight to a shop to have it replaced.

[Jdub]

bosch or ngk are the plugs i would go with. be sure to replace the cap, rotor and wires too.

orlando is a hell of a lot further from denver than 8 hrs.

Lol, Im currently in Atlanta, Im going to be in Orlando for the summer.

And the timing belt was done 40k miles ago/8 years ago (this is the first thing I plan on doing once in Orlando)

Could timing belt be the issue?

Also, since Im learning from scratch, how would I learn how to do easy DIY stuff like that? I need to learn what the rotor and the cap and very simple stuff like that actually is.. I know, I know nothing but I gotta start somewhere.

[Matt-B]

Darin is right, lots of stuff can be done cheap, or free, i had a friend by a car, was idling to high, turns out some build up in the throttle body was keeping the flap open a smidge

at the very least, cleaning some of those items, will eliminate the possibility of them not functioning correctly, due to being gummed up. Id replace the fuel filter also, can do it without jacks or anything, and its like 10$

[CorvallisBMW]

I few things you can do for free, like cleaning the AFM and ICV. I figure since you're on the road, it needs to be quick and cheap. You could also throw new plugs in it, and check the condition of the cap and rotor. Seafoam probably won't hurt as long as the rest of the engine is in decent shape. How long has it been since the timing belt was replaced??

[Stanley Rockafella]

orlando is a hell of a lot further from denver than 8 hrs.

HOLY DOODLE it's like 27-28 hours!