Project Weißer Regen: 91 318iS Restomod

[Melon]

I'll have to let you know when I'm in Houston next time, would love to meet you and talk shop.

[Jordan]

This is coming along nicely! When do you expect to be complete? Have family in Houston and would love to swing by and check this out.

2-3 months I hope, PM me when you'll be in town I'd be happy to have it available for viewing.

Jordan, I have to ask this because it's driving me crazy. It is such a pain in the ass to align the front bumper and for some reason or another the middle of mine seem to come up more than the sides and I'm not sure why that is. I can't image the bumper struts are the ultimate cause, but i also can't imagine anything else is the cause either. Yours seems to be a nice body line all the way across the front, but like I said, mine is almost like a rainbow (only not that dramatic). anyway, i figured with your knowledge you might have some suggestions on aligning that thing.

Your valance is likely sagged. Two bolts hold it to the core support behind the grills. Loosen them and slide it up.

what product did you use for dying?

I subbed this out to my local Fibrenew. They use some fancy crosslinked polymer dye, its very tough stuff, permanently bonded.

[jrobie79]

That said E30 dash trim isn't exactly black in the first place, its always been a dark gray color. I had everything redyed the original color matching off a swatch under the cluster bezel that never saw daylight.

what product did you use for dying?

[jeenyus]

Jordan, I have to ask this because it's driving me crazy. It is such a pain in the ass to align the front bumper and for some reason or another the middle of mine seem to come up more than the sides and I'm not sure why that is. I can't image the bumper struts are the ultimate cause, but i also can't imagine anything else is the cause either. Yours seems to be a nice body line all the way across the front, but like I said, mine is almost like a rainbow (only not that dramatic). anyway, i figured with your knowledge you might have some suggestions on aligning that thing.

[Court M3]

This is coming along nicely! When do you expect to be complete? Have family in Houston and would love to swing by and check this out.

[Jordan]

I'm going to go with its more the lighting than anything, if you look at the boots on the garage floor pictures they are very much BLACK, where as they look gray in the interior.

That said E30 dash trim isn't exactly black in the first place, its always been a dark gray color. I had everything redyed the original color matching off a swatch under the cluster bezel that never saw daylight.

Rolled her out of the garage yesterday for her first bath, hard to tell but was very dusty.

[Motheye99]

Very nice to see this coming along. Is it the camera or are the interior parts alot more grey then the originals in my 318is.

Is this how they come from the factory now?

Sent from my SM-G970U using Tapatalk

[Jordan]

Small update for now, more to follow later...

Parking brake and shifter boots installed on their respective frames:




Snapped into place in the interior with the freshly refinished consoles and glovebox installed to match the dashboard.

[Jordan]

Definitely gonna need an update chief

You and me both.

I'm waiting for components to proceed really.

Upholstery is pending, should be done soon.

Engine is in the machine shop waiting on the custom pistons.

I think the engine is more likely to be done first but we'll see.

I'll have a small update this weekend.

[bmoores]

Agreed 100%

[Das Delfin]

Definitely gonna need an update chief

[Jordan]

I use Dapwood Contact Cement. Lowes/HD have it. I buy a 1 pint bottle and a package of acid brushes from Harbor Freight as they are disposable single use.

[Rontgen]

Looks amazing! I just purchased the CA Tuned Headliner, do you have a specific recommendation for contact cement?

Thank you!

[MR 325]

Thanks Matt, yes I am very happy with the fitment. CATuned has the fabric spot on to what is original. It stretches as needed great, bows and stitches in correct locations and fit/finish was a 10/10.

I would recommend their headliner product to anyone needing a headliner.

Awesome. Good to know! I am ready to do mine soon.

[Jordan]

Looking good. Are you happy with the headliner? Is it a OE style material?

Thanks Matt, yes I am very happy with the fitment. CATuned has the fabric spot on to what is original. It stretches as needed great, bows and stitches in correct locations and fit/finish was a 10/10.

I would recommend their headliner product to anyone needing a headliner.