Announcement

Collapse
No announcement yet.

My e30 Project... Mtech II sedan, Jlines, Vaders, M50 and much more...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • motorsports_3
    replied
    I got a little bit of work done today. I just got the rear window locked in and the gasket cleaned. The car is now fult driveable. I dont have to worry about the windows flying out or the doors not locking.
    Window coming out

    Seal.

    I cleaned the seal out and it has no overspray on it now
    Window back in

    Seal on


    All done

    Leave a comment:


  • motorsports_3
    replied
    Originally posted by Dragowl View Post
    This car has come a long way...nicely done...did you get the central locking squared away? My issue was related to the driver's door actuator going bad.
    Thank you.

    Yeah, it was the CLS thinking the drivers door was open. There is a wire harness behind the speaker, the main one thst goes into the door. Inside of that I had a little mini harness disconected
    Originally posted by e30 gangsta View Post
    damn man nice to see your dedicated to make it a nice car.
    Thank you G

    Originally posted by alpinaclone View Post
    Wow, nice transformation.
    Thanks

    Leave a comment:


  • alpinaclone
    replied
    Wow, nice transformation.

    Leave a comment:


  • e30 gangsta
    replied
    damn man nice to see your dedicated to make it a nice car.

    Leave a comment:


  • Dragowl
    replied
    This car has come a long way...nicely done...did you get the central locking squared away? My issue was related to the driver's door actuator going bad.

    Leave a comment:


  • motorsports_3
    replied
    I have been busy with school so I have been doing a little bit here and there. Hence the reason for not too many updates.

    Here is stuff I have done inthe past week or so.

    You may have noticed, but the side skirts were droopy. I finally installed the clips i have had forever. lol



    I painted behind the grille black, to hide any overspray


    I cleaned the windshield gasket, and applied the lock. This has to be the most annoying thing i have done on the car yet





    How the hell did you get up there??? She was watching me


    Removing the backseat to asses the fuel light problem. I think I have got it


    All done


    Looking for the problem with the central locking system

    To get to the components. The drivers door stripped

    All the parts I removed


    All done


    While I had the door apart I took the lierty to add these covers under the mirrors


    The back drivers side door would not lock, so I changed the locking actuator

    All done


    The back passenger door handle was broken so I swapped that out


    All done


    I tore the trunk apart looking for the problem with the locking system.


    All clean. Yes i know I need a new carpet, lol

    Leave a comment:


  • motorsports_3
    replied
    Originally posted by moatilliatta View Post
    4d hottnessss. i want. good work man. GOOD WORK!
    Thank you
    Originally posted by 240zs30 View Post
    Hooray, the wheels are on! Nice job man. Looks great! Congrats.
    Yeah, its about time. Thank you.

    Originally posted by deutschman View Post
    nice car but i would keep the black trim.
    Which black trim? One the doors? They got replaced with the m tech kit.
    Originally posted by Bimmerista View Post
    As far as getting shine out of the dashboard, door cards, & center console...instead of using something like Armor All or any shine/cleaning products, use Olive Oil.

    The Vitamin D in olive oil makes the plastic clean & restores the shine without it being obnoxiously shiny or greasy. If you rub it enough evenly throughout all surfaces, it'll look naturally clean. I regularly clean the dash on my car with olive oil & I also don't have any cracks, especially in the hot TX sun.
    Thank you for the info. I will be doing that asap.
    Originally posted by PhillyG View Post
    Damn not bad for a kook! j/k man, great job. That is quite the project you have engulfed on.

    Haha, thanks bro

    Originally posted by tuNED318 View Post
    fack me... this is unbelievable!


    I want to do the same with mine!

    From

    To


    :bow:
    Thank you. Do it, it take time and patience, but at the end it pays off. I just drove mine around, and beleive me it pays off.

    Leave a comment:


  • tuNED318
    replied
    fack me... this is unbelievable!

    I want to do the same with mine!

    From

    To


    :bow:

    Leave a comment:


  • PhillyG
    replied
    Damn not bad for a kook! j/k man, great job. That is quite the project you have engulfed on.

    Leave a comment:


  • Bimmerista
    replied
    As far as getting shine out of the dashboard, door cards, & center console...instead of using something like Armor All or any shine/cleaning products, use Olive Oil.

    The Vitamin D in olive oil makes the plastic clean & restores the shine without it being obnoxiously shiny or greasy. If you rub it enough evenly throughout all surfaces, it'll look naturally clean. I regularly clean the dash on my car with olive oil & I also don't have any cracks, especially in the hot TX sun.

    Leave a comment:


  • deutschman
    replied
    nice car but i would keep the black trim.

    Leave a comment:


  • 240zs30
    replied
    Hooray, the wheels are on! Nice job man. Looks great! Congrats.

    Leave a comment:


  • moatilliatta
    replied
    4d hottnessss. i want. good work man. GOOD WORK!

    Leave a comment:


  • motorsports_3
    replied
    Well I got the car cleaned up for te most part today. I missed a few parts in the interior, and some wax in crevices, because I lost my cleaning brushes some where in my clean garage. I also need to bring the shine out of the dash board.
    I need to do something about those seat backs. I may wrap them in vinyl.



    Look at the dirty interior


    Seats removed


    Vacuumed

    Panels cleaning


    Done





    I need to fix the OBC, find a few small interior parts, clean the windshield and rear window gaskets, and lock them in. I also need to clean the engine bay and clear coat the tails. Then the ICE.

    I also washed the outside and took some practice photos with my new SLR. This was a quick impromtu photoshoot. There is still some more work to do before the final shoot.




















    I also tried some rolling shots, but I had the shutter speed too quick, so you cant really tell.












    Let me know which ones you guys like...

    Leave a comment:


  • motorsports_3
    replied
    Originally posted by iwantspeed View Post
    looks great
    Thank you
    Originally posted by Reign View Post
    I just spent all night reading this thread. I just want to say that you have a very steadfast attitude and all the props to you. I would have been discouraged and given up with all of the hurdles that were laid in front of you. The car looks amazing bro. Keep up the posts.
    Thank you. That really means a lot to me.

    Originally posted by lowlightbw View Post
    awesome thread! keep up the inspiring work!
    Thank you.

    Originally posted by M42Technik View Post
    Pictures of the Nissan in the background?!
    Oh yeah. Ill take some with my new camera tomorow...

    Leave a comment:

Working...
X