Installed rear headrest. Installed LTW hood flag. Missing a section for the rear.
Announcement
Collapse
No announcement yet.
What did you do to your E30 today?
Collapse
This is a sticky topic.
X
X
-
Body work, putty, primer, paint, and clear on my fender I welded yesterday. Adjusted my brake pedal. Took my seats apart and fixed them. And painted my weaves.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
Changed the transmission fluid with Redline MTL, and changed the transfer case fluid with Redline ATF.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
- ran new power line to amps
- spent 3 days undoing 12 years worth of half assed crimps, while doing corrected that
"random, no cranking but relay click's starting problem", it was the YL/BK wire under steering wheel, crappy crimp ate cable after sloppy aftermarket alarm removal.
- traced and fixed engine harness wires, connectors.
- reprogramed LC-1
- relocated power steering fluid reservoir, sits between abs pump and steering rack attache to lower rail
- etc
happy happy.
Comment
-
Originally posted by DER E30 View PostIs there a huge difference in the oil performance with different weights?
Sent from my iPhone using Tapatalksigpic
1987 325e Lachssilber w/ MarkD chip and late bumpers, Zender EVO spoiler, s3.25 LSD
Originally posted by nandoI don't think there's really strong evidence that ZDDP harms cats.
Comment
-
Originally posted by FL318is View PostRotors and pads but, the drivers rear rotor is NOT coming off. Any ideas?
Today I threw my muffler on, and id didnt fit right possibly because the heat shield I have is off a coupe. time to trim shit.
Comment
-
What did you do to your E30 today?
crappy intake cover
throttle cable replacement
Sent from my iPhone using TapatalkLast edited by ngampleh; 01-03-2015, 08:05 AM.[ETA - E30 Adapters] 5 Lug kit with e46m3 front and e46 325/328i rear brake setup
---------------------------------------------------------------
[ETA - E30 Adapters] - 5 Lug kit | DTM Shifter | DSSR
---------------------------------------------------------------
Transaction Feedback
Comment
-
I finally got my passenger front fender flare and side skirt back on. And did rear brake rotors and pads.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
RSM and RSM reinforcement plates from garagistic. I drove through the snow.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
Comment