Announcement

Collapse
No announcement yet.

Accuracy Automotive (Jparkr) 327is build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Accuracy Automotive (Jparkr) 327is build

    ok, so since my 325is got the interior remodeled to my liking, most the components off the engine (A/c P/s cruise, ect.), and the wirring harness drasticly simplified (deleted obc, srs, cruise, ect.).
    original build thread:
    http://www.r3vlimited.com/board/showthread.php?t=88753
    this happend:


    to find out how visit:
    http://www.r3vlimited.com/board/showthread.php?t=92872

    Anyway, its time to start a full rebuild. A rebuild that was eventually going to be done; but didnt want it to be so soon. im going to rebuild the engine to a 2.7i.
    that build thread can be found here:
    http://www.r3vlimited.com/board/showthread.php?t=98638

    ok
    lets get caught up to where im at now.

    assesing the situation and removing all the damaged peices:


    Then i gathered up the peices i would need. finally it was time for the engine to move out for the paint shop:

    "crivy and i working late."



    ^ stupid me, i get to find my third shift support rod now.

    as it sits right now, ready for my to pull the interior and harness:

    my e36 rack would have been WAY easier this way. :hitler:

    sad

    my new undrilled boot lid, for my M3 replica wing

    as usual, i will keep updating as the project continues.

    1987 PRO-3 car /1990 325is (2.7i Concours)

    #2
    Total bummer bro, im sorry... what color, wheels and style honda was it? if i see him ill fucking plow over him in my jeep for ya!! This truely is some baby back Bullshit...goodluck
    -Brandon
    sigpic

    Comment


      #3
      Happened on THE 5 eh? That sucks, I didn't see that thread until now! :(
      BimmerHeads
      Classic BMW Specialists
      Santa Clarita, CA

      www.BimmerHeads.com

      Comment


        #4
        Update2

        began pulling the interior today. hopefully will have the wirring harness out by tomorrow/tuesday and the car in the shop by the later end of the week *fingerscrossed*

        Starting the day:

        didnt wanna damage the blackline so its put away and the momo has been on.



        no more heaterbox or wiper motor


        Thats it for tonight. damn daylight savings time. i was using a coleman gas lantern for light and james i kept getting burnt. ok more to come later.

        1987 PRO-3 car /1990 325is (2.7i Concours)

        Comment


          #5
          good luck kid <3

          Comment


            #6
            Can't wait for the finished result

            Comment


              #7
              update, pictures tomorrow

              Only thing I'm gonna comment on is how much I hate pulling the wiring from the gas tank...

              Tank is now remounted and all under car wiring is removed.

              Tomorrow I'll have the wiring 100% removed and the car will be trailered to the body shop this week. Thank GOD!

              Pics tomorrow.

              1987 PRO-3 car /1990 325is (2.7i Concours)

              Comment


                #8
                Update 3

                picture updates.
                New hood.

                Carpets come out much easier when they are rotting and you have a knife.

                Pulling the harness alone took more time then I thought.

                But after about 15 minutes it all was done.




                Ill try to get more once its all cleaned out. Its body shop time! :D
                Last edited by Jparkr; 11-30-2007, 06:51 PM.

                1987 PRO-3 car /1990 325is (2.7i Concours)

                Comment


                  #9
                  Update 4

                  So I got the engine out of my garage, and my car out of the driveway today!!! :D It is sitting at my parents house for the rest of the weekend to finish some little things before the body shop. The trailer we used was really, really cool but i couldn't get any pictures of it because it was too dark. Anyway, pictures below as usual.

                  Towing the car.


                  Its very temporary resting spot at my parents.


                  Removing flywheel to get engine stand attached


                  All hooked up and ready to be worked on while the car is getting painted.



                  more later as usual.

                  1987 PRO-3 car /1990 325is (2.7i Concours)

                  Comment


                    #10
                    Good progress. Are you having the engine bay painted as well?

                    Comment


                      #11
                      So what exactly is happening here? Why you are completely stripping the car?

                      Comment


                        #12
                        full respray, engine rebuild. ect.

                        1987 PRO-3 car /1990 325is (2.7i Concours)

                        Comment


                          #13
                          Chassis is at the bodyshop!!!!!! WOOOO!!!!!! next update with pictures will be in about 3 weeks but it will be BIG

                          1987 PRO-3 car /1990 325is (2.7i Concours)

                          Comment


                            #14
                            great work


                            -
                            Project
                            Parts for Sale
                            Feedback
                            YouTube Channel

                            Comment


                              #15
                              Update 5

                              Small, the body shop is backed up i guess because they just started last week... I only got 3 pictures before my battery died. I am very excited though.


                              Ben's Cabrio's core support :-)




                              yay. more later.

                              1987 PRO-3 car /1990 325is (2.7i Concours)

                              Comment

                              Working...
                              X