PSA: Turner J Stock Springs are Available Again

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Digitalwave
    is a poseur
    • Oct 2003
    • 6301

    #76
    Originally posted by craz azn
    Bumping this up... anyone had personal experience with Bilstein's and revalving lately? I noticed on the Bilstein website, they do not offer revalving services any longer for off-the-shelf products... only for Motorsport dampers. They recommend to send regular shocks to PSI... charging a whopping 350 per damper. Any other more cost-effective solutions out there in 2026?
    RE Suspension in Mooresville, NC can do them for you cheaper than that. Rebuilds start at $75 and revalving isn't much more than that besides the parts and labor.

    RISING EDGE

    Grassroots racing, properly overthought.

    Comment

    • 2mAn
      SeƱior Mod
      • Aug 2010
      • 21079

      #77
      I have a set of the J-stock springs and really wanted the matching Bilsteins, especially the inverted rears but couldnt find anything.

      Do they have the specs for J-stock Bilsteins and can they re-valve a Koni to match? My Single Adjustable Koni's are doing a decent job for now
      Simon
      Current Cars:
      -1966 Blue Boat
      -1969 Red VW
      -1986 White BMW
      -2006 Green Thing

      Make R3V Great Again -2020

      Comment

      • craz azn
        Mod Crazy
        • Jul 2004
        • 752

        #78
        Thanks TJ. I will check into it, and post back here with an update.

        Rippin' Proper | Youtube | Vimeo |

        Comment

        • craz azn
          Mod Crazy
          • Jul 2004
          • 752

          #79
          RE says the service is 95 per shock, plus parts. Two week turnaround time. That's pretty good to me!

          Rippin' Proper | Youtube | Vimeo |

          Comment

          Working...