
SoCal General Chat
Collapse
This is a sticky topic.
X
X
-
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
www.gecoils.com
My euro 316 project Transaction Feedback -
-
I'm over this car, Ok so I started with what I thought was a timing belt/water pump job and valve adjustment. FML#1: Found out that one of the rocker arms was broken. so I fix that, redid everything else again. So I started putting back all the coolant hoses, FML#2: Found out that the water pump was the wrong one because the one I received, had two outlets, and mine only has one, didn' realised that until I started putting the hoses back. So I went to Autozone real quick bought the right water pump and installed it. Put everything back again. Changed the oil filter, added oil. Then I started adding water to the system (added water instead of coolant just to make sure there was no leaks). Checked to see if the was any leaks, found two, one on each side of the engine. One was just a loose hose, I tighten that and went to the other side to see where the leak was coming from. FML#3: Found that the thermostat housing was cracked. LOL.
I knew I should of changed it. :(Comment
-
I'm over this car, Ok so I started with what I thought was a timing belt/water pump job and valve adjustment. FML#1: Found out that one of the rocker arms was broken. so I fix that, redid everything else again. So I started putting back all the coolant hoses, FML#2: Found out that the water pump was the wrong one because the one I received, had two outlets, and mine only has one, didn' realised that until I started putting the hoses back. So I went to Autozone real quick bought the right water pump and installed it. Put everything back again. Changed the oil filter, added oil. Then I started adding water to the system (added water instead of coolant just to make sure there was no leaks). Checked to see if the was any leaks, found two, one on each side of the engine. One was just a loose hose, I tighten that and went to the other side to see where the leak was coming from. FML#3: Found that the thermostat housing was cracked. LOL.
I knew I should of changed it. :(@IRON-E30 aka Edwin:DComment
-
I've got a brand used new cooling system that I picked up for a customer who flaked.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
www.gecoils.com
My euro 316 project Transaction FeedbackComment
-
-
Comment
-
Comment
-
Dam that sux, ive been adding water every 3day found out it was a faulty cap. fixed no issues now, glComment
-
control arms still forsale, will trade for front lowering springs, so i can drop my car b4 bfest ,also got a 87 water pump with low miles , was givin to meComment
-
a weekend and a day later...finally finished changing my rear wheel bearings and swapping out the axles.Comment
-
91 318is...DD:finger:/85 325es SOLD/91 318is RIP
Originally posted by naplesE30Must stop clicking on Norwegian threads. Makes me wanna punch my car in da mouf.Originally posted by einstein57My tranny sounds like a blender full of walnuts. So I added sound deadner to the tunnel and put in a louder stereo. Am I doing it right?
North Hollywood, Ca. 818 310-2497Comment
-
Lol, I picked up a plate filler last night for $35 shipped. Mine was fubared last week, after falling off complete with my License Plate, you gotta be on the hunt 24/7 to get what you need homie. Hopefully the new used one will be here before Bfest. ;)@IRON-E30 aka Edwin:DComment
Comment