SoCal General Chat

[ToPLeSS(e30)FeinD]

Anybody have stock e30 springs that will work on a 325e?

i haz teh vert springs... :)

hmu

[E30 331is]

Anybody have stock e30 springs that will work on a 325e?

Would 325is springs work? I have the fronts at (118 rate)and the rears Eibach Pro (277 rate, stock are 265 with one extra coil).

[E30_Pare]

Don't have any 4x100 weaves other the some VW BBS RAs and my ESMs

Still siting on those RAs? How much?

[sagenev63]

Anybody have stock e30 springs that will work on a 325e?

I've got a set from an '89 sedan. pm me.

[Robotin]

i haz teh vert springs... :)

hmu

Would 325is springs work? I have the fronts at (118 rate)and the rears Eibach Pro (277 rate, stock are 265 with one extra coil).

I've got a set from an '89 sedan. pm me.

wait! pick me! pick me! haha

[turge]

Chilling at the beach. Great way to end the first day back to school.



Sent from my HTC ThunderBolt using Tapatalk 2

[CHIF8008]

do i really need to remove the hub to get the backing plate off in tact and without cutting it off? i wanna be able to sandblast and paint the strut tubes but the shield is in the way.

i want to reuse my parts so is there a way to remove all of this saftly or will it be a pain?

[einstein57]

Still siting on those RAs? How much?

$250

do i really need to remove the hub to get the backing plate off in tact and without cutting it off? i wanna be able to sandblast and paint the strut tubes but the shield is in the way.

i want to reuse my parts so is there a way to remove all of this saftly or will it be a pain?

If you don't care about the shield you can just cut it off

[CHIF8008]

WITHOUT cutting it off. gah, guess im gonna be cutting it. i want to be able to re-install it though- any tips on how to cut it?

[ToPLeSS(e30)FeinD]

WITHOUT cutting it off. gah, guess im gonna be cutting it. i want to be able to re-install it though- any tips on how to cut it?

find the area with the least amount of metal to have to go through and take some tin snips to it, if you dont have access to air tools or a sawzaw


oh and since u guys that et53 was bad...

http://forums.bimmerforums.com/forum/showthread.php?t=1873207

[aje28]

Would anyone be willing to donate their stock springs? :D

[ToPLeSS(e30)FeinD]

i haz teh vert springs... :)

hmu

ummm yes

[thebutcher37]

[dvck]

Want to trade my Esm's, anyone? Thread in wheels and tires.

sir, do we still have a pending trade?

215/40s

thank you, i found that was the best i liked in photos
wanted to see if i could squeeze in a 225 in the fronts
for an 8.5 square set.

Anybody have stock e30 springs that will work on a 325e?

Would anyone be willing to donate their stock springs? :D

i donate, just gotta pull them out of the car, probably
motivation to move suspension bits from the trunk to
where they belong on the car. see you at starbux again? lol

[Robotin]

hey bdro's