NOR-CAL General Chat.

[rob&e30]

Wife is on a bis trip. first time apart in 2 years. what should i do this week?

lets get stupid drunk and paint the street of Campbell!




Pics of free e30 plz!

[Cabriolet]

lets get stupid drunk

tomorrow night anyone? my place. no shitty beer. no e36s

[canakami]

no e36s

Lulz

[blazinxpk]

tomorrow night anyone? my place. no shitty beer. no e36s

you forgot no 4 cylinders.

[freeride53]

Hey guys i'm installing 18 and 20 mm staggered spacers. Will I need to roll my fenders now?

[Cabriolet]

you forgot no 4 cylinders.

that's right. gary has my 4cyl pos. no m42s @ my party, m10s are ok tho, and herb can come too, his coolness overcomes is cylinder shortfall

[joonsup]

Hey guys can you help me out. Wondering if my friend who has a 325e with a poor man stroker motor (i head and e block) can use an "i" clutch and flywheel on his car direct swap. If not, what does he need to do? I gave him my sach clutch kit and my old flywheel. Any help would be appreciated thanks.

[Cabriolet]

he will need to update the ECU and engine harness to run that setup.

the ETA's timing it taken off the dual mass flywheel notch

[oliver.r]

if party at your house im downnn

[cyberkaa]

Hey guys can you help me out. Wondering if my friend who has a 325e with a poor man stroker motor (i head and e block) can use an "i" clutch and flywheel on his car direct swap. If not, what does he need to do? I gave him my sach clutch kit and my old flywheel. Any help would be appreciated thanks.

The ecu was already changed to an "i" one right? IIRC, the sensors from the bellhousing were deleted, so yes, should be able to run "i" clutch setup.

[Cabriolet]

oh, he's running the '87 upgrade?

[cyberkaa]

I remember he swapped the harness.

[mbonanni]

Have him check what ecu he is running.

From the sounds of it, I think he will be able to use the I flywheel and clutch.

[joonsup]

He's using a 173 ecu and yes he did swap out the harness to the "i" harness. He was worried about the starter and it not being compatible with the I flywheel or something

[Cabriolet]

they mount the same. different fly wheel bolts. but the starters are the same. you will also notice there may be a transmission distance issue, causing the clutch slave to not release the clutch.